Mark 3 Unitized Self-Primer
The Durco Mark 3 Unitized Self-Priming pump is engineered to draw from liquid sources below ground level or from sources that have no positive pressure to naturally prime the pump.
Click to enlarge
1 image available
- Brands:
Durco - Applications:
Gas Treating and Sulfur Recovery, Slurry Processing, Polymers, Agriculture, HVAC, Waste Processing, Automotive, Heavy Oil, Oil Sands and Shale, Water Supply and Distribution (water), Auxiliary (chemical), Hydraulic Press (metals), Water Supply and Treatment (oil and gas), Solvents, Auxiliary Services (power), LNG, Bleach Chemical (pulp and paper), Leaching Acid, Chemical and Liquor (pulp and paper), Acid Transfer, Coatings (pulp and paper), Nuclear Service, Construction, OEM, Cooling Water (metals), Offsites and Waste Treatment, Caustic and Chlor-alkali, Desalination, Pharmaceuticals, Dewatering and Water Supply (mining), Plating, Galvanizing and Other Coatings, Drilling and Production, Renewable Fuel Production, Water Treatment, Electronics, Sewage Collection and Treatment, FPSO, Shipping, Food Processing, Volatile Organic Compounds - Industries:
Chemical Processing, General Industries, Mining, Water Resources, Power Generation, Primary Metals, Pulp and Paper, Oil and Gas - Standards:
ASME (ANSI) - Misc:
External Micrometer Impeller Adjustment accurately sets impeller clearance in 20 seconds, in the shop or the field.
Standard Reverse Vane Impeller offers repeatable pump performance throughout the life of the pump.
Unitized Casing has large priming chamber, air separator and volute in one integral component.
Large Shaft and Bearing Components extend bearing life and reduce shaft deflection and vibration.
Features:
- Offered in a wide range of metallurgy
- Reverse Vane Impeller
- Low, predictable seal chamber pressures
- Low required NPSH
- Rear cover wear surface
- In-shop impeller adjustment
- Repeatable performance assurance
- ANSI 3A Power End
- Certified clean rooom assembly
- Inpro/Seal's VBX isolators
- Magnetic drain plug
- Synthetic oil bath, oil mist, shielded, grease-lube
Operating Parameters
- Flows to 320 m3/h (1400 gpm)
- Heads to 120 m (400 ft)
- Pressures to 20 bar (285 psi)
- Temperatures to 370°C (700°F)
- Static suction lift to 6 m (20 ft)
Mark 3 Unitized Self-Primer App
Mark 3 Unitized Self-Primer Chart
Showing all languages below...
Mark 3 Group 4 Установка Эксплуатация Техническое обслуживание
Mark 3 Group 4 Центробежные насосы для химических производств
Flowserve Solid Stainless Steel and Other Shafts for Durco Process Pumps
Flowserve Solid Stainless Steel and Other Shafts for Durco Process Pumps - (Vollwellen aus Edelstahl und Verbundwerkstoffen für Durco-Prozesspumpen)
Flowserve Solid Stainless Steel and Other Shafts for Durco Process Pumps
Flowserve Solid Stainless Steel and Other Shafts for Durco Process Pumps - (Arbres en acier massif et autres arbres pour les Pompes process Durco)
Flowserve Solid Stainless Steel and Other Shafts
Flowserve Solid Stainless Steel and Other Shafts for Durco Process Pumps - (Alberi monoblocco in acciaio inossidabile e altri Tipi per le pompe di processo Durco)
Flowserve Solid Stainless Steel and Other Shafts for Durco Process Pumps
Flowserve Solid Stainless Steel and Other Shafts for Durco Process Pumps - (Ejes sólidos de acero inoxidable y de ostros tipos para las bombas de proceso Durco)
Produzione di energia
Flowserve Produzione di energia: Cicli combinati, Combustibili fossili, Nucleare
Production d' énergie
Flowserve Production d’ énergie: Cycle Combiné, Combustible fossile, Nucléaire
Bombas de geração de energia
Flowserve Geração de Energia: Ciclo Combinado, Combustíveis Fósseis, Nucle
Chemical Processing Pumps
Flowserve Pumps for Chemical Processing - Process, Heat transfer, Effluent Treatment, Auxiliary
Chemical Processing Pumps
Flowserve Pumps for Chemical Processing - Process, Heat transfer, Effluent Treatment, Auxiliary
Processamento de Produtos Químicos
Processamento de Produtos Químicos - Processamento - Transferência de Calor-Tratamento de Efluentes - Auxiliares
Chemieprozesse Pumpen
Flowserve Chemieprozesse: Prozess, Wärmetauscher, Abwasseraufbereitung, Hilfssysteme
Risorse Idriche
Flowserve Risorse Idriche: Presa e Movimentazione delle Acque; Trattamento e Trasferimento; Acque di Rifiuto; Irrigazione; Controllo Inondazioni, Bacini di Carenaggio e Drenaggio
Le pompage de l’eau
Flowserve Le pompage de l’eau Captage et adduction d’eau, Traitement et transport de l’eau, Eaux usées, Irrigation, Maîtrise des crues et drainage
Recursos hidráulicos
Flowserve Recursos hidráulicos: Captación y conducción de agua; Tratamiento y distribución; Aguas residuales; Riego; Control de inundaciones, diques secos y drenaje
Snabdijevanje vodom
Flowserve Snabdijevanje vodom - Izvori i prijenos vode Prerada i distribucija - otpadne vode - navodnjavanje Kontrola poplava, suhi dokovi i odvodnja
Wasserversorgung
Flowserve Wasserversorgung Wassergewinnung und Wasserversorgung, Aufbereitungs- und Verteileranlagen, Abwasser, Bewässerungsanlagen, Hochwasserschutz, Trockendocks, Entwässerung
Water Resources Pumps
Flowserve Water Resources: Source Water and Water Transmission; Treatment and Distribution; Waste Water; Irrigation; Flood Control, Dry Docks and Drainage
Bombas para minería y para procesamiento de mineral
Flowserve Bombas para minería y para procesamiento de mineral - Beneficio - Hidrometalurgia - Refinado
Energía solar concentrada
Flowserve Energía solar concentrada - Colector parabólico - Torre de concentración
Durco Mark 3 forseglede metallpumper Brukerveiledning
Installasjon, Drift, Vedlikehold Brukerveiledning - Mark 3 standard-, in-line-, lo-flo-pumper, pumper med tilbakretrukket løpehjul, selvfyllende modulærpumper og Sealmatic-pumper (Innbefattet P-10-502-E)
Durco Mark 3 gekapselte metallische Pumpen
Installation, Betrieb, Wartung - Mark 3 Standard, Inline, Lo-Flo Pumpen, Freistrompumpen, modulare selbstansaugende und Sealmatic Pumpen (basierend auf P-10-502-D)
Герметичные металлические насосы Durco Mark 3
Установка, Эксплуатация, Техническое, обслуживание - Mark 3 – стандартные, многорядные, герметичные насосы с низким расходом, рабочим колесом с полыми лопастями и самозаливкой (включает P-10-502-R)
Durco Mark 3 pakkede metalliske pumper Brugervejledning
Installation, Betjening, Vedligeholdelse Brugervejledning - Mark 3 Standard, In-Line, Lo-Flo, Tilbagetrukket pumpehjul, Ensartet selvspædning og Sealmatic pumper
Pompes métalliques Mark 3 à système d'étanchéité classique
Pompes métalliques Mark 3 à système d'étanchéité classique Standard ANSI, En ligne (In Line), Faible Débit (Lo-Flo), Vortex, Auto-armorçantes - Instructions D'utilisation: Installation, Fonctionnement et Maintenance (intègre le P-10-502-E)
Mark 3 metalen pompen met mechanische asafdichting
Mark 3 metalen pompen met mechanische asafdichting - Installatie, Onderhoud, Gebruik
Pompe metalliche a tenuta Durco Mark 3 Manuale d'uso
Installazione, Funzionamento, & Manutenzione Pompe normali, in-line, a basso flusso, con girante integrata, autoadescanti unificate e Sealmatic Mark 3 (basato su P-10-502-I)
Durco Mark 3 bombas metálicas selladas Instrucciones Para El Usuario
Instalación, Operación, & Mantenimiento Instrucciones Bombas Estándar Mark 3, En Línea, Lo-Flo, Impulsore Empotrado, Autoimprimacion Unificada y Sealmatic (incorpora P-10-502-S)
Bombas de Boletín Durco Mark 3
Flowserve Durco Mark 3 Bombas - Mark 3 estándar, Sealmatic, Lo-Flo, Impulsor empotrado, Auto cebador unificado
Durco Mark 3 Pumps Bulletin
Durco Mark 3 Product Bulletin-ANSI Chemical Process Pump including the: Mark 3 Standard, Sealmatic, Lo-Flo, Recessed Impeller, Unitized Self Primer
Durco Mark 3 Pompes
Durco Mark 3 Pompes process-chimie ANSI Mark 3 Standard, Sealmatic, Lo-Flo, Vortex Auto-amorçante
Pulp and Paper Pumps
Flowserve Pumps for Pulp and Paper - Pulp Production, Chemical Recovery, Paper Stock Preparation, Paper Manufacturing, Mill and Environmental Services
Mark 3 Group 4 User Instructions
Installation, Operation, and Maintenance Instructions for Centrifugal Chemical Process Pumps
Solid Stainless Steel and Other Shafts for Durco Process Pumps Bulletin
Flowserve Solid Stainless Steel and Other Shafts for Durco Process Pumps
Durco Mark 3 ANSI Pumps Maintenance Checklist
Flowserve Durco Mark 3 ANSI Pumps Maintenance Checklist - Previously M-CARDS
Power Generation Pumps
Flowserve Pumps for Power Generation - Combined cycle, fossil fuels and nuclear
Chemical Processing Pumps
Flowserve Pumps for Chemical Processing - Process, Heat Transfer, Effluent Treatment, Auxiliary
RTN-R Certificate Newark
RTN-R Newark Pump type: HOC3, GRP, E-LINE, FRBH, CPX, CPXM, CPXG, CPXP, CPXR, CPXRM, CPXS, CPXPM, CPXPS, CPXSM, Mark3, Mark3-in line, Lo-Flo, Sealmatic, Guardian, Polychem S/F/L/M/GRP-Series, ME, MEN, Chemstar, Chemstart MD, CPXN, CPXNS, WMV, LNN, LNNV, LNNC, LRS, LR, LRV, LLR, CPXV, CPXRV, FRBHJ, Polychem VGRP-Series, FRBHJC
Mark 3 Pre-Engineered Baseplates Bulletin
Mark 3 Pre-Engineered Baseplates - Flowserve offers a family of five types of pre-engineered baseplate designs to extend pump life and reduce costs.
Genuine Flowserve Replacement Parts Bullletin
Genuine Flowserve Replacement Parts Bulletin - Chemical Process Pumps
Water Resources Pumps
Flowserve Pumps for Water Resources - Source Water and Water Transmission; Treatment and Distribution; Waste Water; Irrigation; Flood Control, Dry Docks and Drainage
Mining and Mineral Processing Pumps Bulletin
Flowserve Pumps for Mining and Mineral Processing - Beneficiation, Hydrometallurgy and Refining
Concentrated Solar Power Pumps
Flowserve Pumps for Concentrated Solar Power - Parabolic Trough, Power Tower
Pumps for CO2 Capture, Transportation and Storage
Flowserve Pumps for CO2 Capture, Transportation and Storage - Pre-Combustion, Post-Combustion, Pipeline, Injection
Pumps for Geothermal Power Generation
Flowserve Pumps for Geothermal Power Generation - Production Well - Heat Transfer Fluid - Condensate Extraction - Circulating Water - Re-injection Well
Durco Mark 3 Sealed Metallic Pumps User Instructions
Installation, Operation, and Maintenance Instructions for Mark 3 Standard, In-Line, Lo-Flo, Recessed Impeller, Unitized Self Priming and Sealmatic Pumps
Mark 3 metalen pompen met mechanische asafdichting
Mark 3 metalen pompen met mechanische asafdichting - Installatie, Onderhoud, Gebruik
Durco Mark 3 forseglede metallpumper Brukerveiledning
Installasjon, Drift, Vedlikehold Brukerveiledning - Mark 3 standard-, in-line-, lo-flo-pumper, pumper med tilbakretrukket løpehjul, selvfyllende modulærpumper og Sealmatic-pumper (Innbefattet P-10-502-E)
Durco Mark 3 gekapselte metallische Pumpen
Installation, Betrieb, Wartung - Mark 3 Standard, Inline, Lo-Flo Pumpen, Freistrompumpen, modulare selbstansaugende und Sealmatic Pumpen (basierend auf P-10-502-D)
Durco Mark 3 pakkede metalliske pumper Brugervejledning
Installation, Betjening, Vedligeholdelse Brugervejledning - Mark 3 Standard, In-Line, Lo-Flo, Tilbagetrukket pumpehjul, Ensartet selvspædning og Sealmatic pumper
Герметичные металлические насосы Durco Mark 3
Установка, Эксплуатация, Техническое, обслуживание - Mark 3 – стандартные, многорядные, герметичные насосы с низким расходом, рабочим колесом с полыми лопастями и самозаливкой (включает P-10-502-R)
Герметичные металлические насосы Durco Mark 3
Установка, Эксплуатация, Техническое, обслуживание - Mark 3 – стандартные, многорядные, герметичные насосы с низким расходом, рабочим колесом с полыми лопастями и самозаливкой (включает P-10-502-R)
Mark 3 High Silicon Iron Pumps User Instructions
Installation, Operation, & Maintenance instructions for Mark 3 High Silicon Iron Pumps
Mark 3 Group 4 Установка Эксплуатация Техническое обслуживание
Mark 3 Group 4 Центробежные насосы для химических производств
Flowserve Mark 3 Hermetyczne Pompy Metalowe
Flowserve Mark 3 Hermetyczne Pompy Metalowe ANSI Standard, In-Line, Lo-Flo, Recessed Impeller, Sealmatic oraz, Unitized Self-Primer - Instrukcja Uzytkownika: Instalacji, Uzytkowania I Obslugi (obejmuje P-10-502b)
Durco Mark 3 bombas metálicas selladas Instrucciones Para El Usuario
Instalación, Operación, & Mantenimiento Instrucciones Bombas Estándar Mark 3, En Línea, Lo-Flo, Impulsore Empotrado, Autoimprimacion Unificada y Sealmatic (incorpora P-10-502-S)
Pompes métalliques Mark 3 à système d'étanchéité classique
Pompes métalliques Mark 3 à système d'étanchéité classique Standard ANSI, En ligne (In Line), Faible Débit (Lo-Flo), Vortex, Auto-armorçantes - Instructions D'utilisation: Installation, Fonctionnement et Maintenance (intègre le P-10-502-E)
Pompe metalliche a tenuta Durco Mark 3 Manuale d'uso
Installazione, Funzionamento, & Manutenzione Pompe normali, in-line, a basso flusso, con girante integrata, autoadescanti unificate e Sealmatic Mark 3 (basato su P-10-502-I)
Durco® Mark 3™ Pumps Bulletin
Flowserve Durco Mark 3 Pumps - ASME Chemical Process Pumps including the: Mark 3 Standard, Sealmatic, Lo-Flo™, Recessed Impeller and Unitized Self-Primer
CPXP Self-Priming ISO Chemical Process Pump
| Description: | Operating on the reflux priming principle, the CPXP self-priming pump offers state-of-the-art hydraulics, versatile operation and reliable performance while costing considerably less to buy, install and maintain than submersible pumps. |
|---|
Mark 3 Sealmatic ANSI Standard, Overhung Pump
| Description: | The Flowserve Mark 3 Sealmatic pump uses a dynamically sealing repeller to eliminate the need for mechanical seals in tough to seal services. This pump conforms to ANSI B73.1M standards and is completely interchangeable with the industry leading Mark 3A power end. |
|---|
Mark 3 In-Line Overhung Chemical Process Pump
| Description: | The Durco Mark 3 In-Line pump exceeds ANSI B73.2M design criteria. This space-saving design utilizes the industry-leading Mark 3A power end and other Mark 3 advanced features for maximum Mean Time Between Planned Maintenance (MTBPM). |
|---|
Mark 3 Lo-Flo Overhung Chemical Process Pump
| Description: | The Durco Mark 3 Lo-Flo pump is designed to improve pump reliability and performance in low-flow, high-head applications. Its innovatiive radial vane impeller and circular, concentric casing was developed to reduce radial loads and shaft vibration while extending bearing and mechanical seal life. |
|---|
Mark 3 Recessed Impeller, Overhung Chemical Process Pump
| Description: | The Durco Mark 3 Recessed Impeller pump combines the best design features of the Mark 3 ANSI Standard pump with the vortex action of a recessed impeller. |
|---|
Mark 3 ASME Standard Overhung Chemical Process Pump
| Description: | The Durco Mark 3 pump is recognized as the worldwide leader in ANSI chemical process pumps. This ANSI B73.1M design offers the industry's most advanced design features for maximum Mean Time Between Planned Maintenance (MTBPM). |
|---|
Ready to buy?
1. Find your closest Flowserve sales contact by using our global sales contacts locator.
2. Call or email the Flowserve sales contact and provide your required specifications.
Still gathering information?
To learn more about Flowserve products, subscribe to our e-mail newsletter.
