HWMA2 ISO 13709/API 610 (OH3) Vertical In-line, Low-Flow, High-Head Overhung API Process Pump
Flowserve’s HWMA is a two stage, vertical in-line overhung pump with a separate bearing bracket. With its small footprint, this low flow, high head process pump is a space-saving alternative to many overhung process pumps in upstream and downstream services.
热传导流体, Gas to Liquids, 酸转移, 加氢裂化, 锅炉给水增压, 氢化处理, 催化裂化, Industrial Gases, 氯碱, LNG, Chemical and Liquor (pulp and paper), Leaching Acid, Cooling Water (power), Crude, Product and CO2 Pipeline, Plating, Galvanizing and Other Coatings, 海水淡化, Residuum and Heavy Oil Upgrading, Digester, 溶媒, Distillation (oil and gas), Volatile Organic Compounds, Drilling and Production, Water Supply and Treatment (oil and gas), FPSO, Water and CO2 Injection, Gas Treating and Sulfur Recovery, Heavy Oil, Oil Sands and Shale
Chemical Processing, 普通工业, Water Resources, Power Generation, Oil and Gas
Replaceable Volute Insert permits precise hydraulic customization. Each insert is engineered for specified head and flow requirements. Accommodates future system changes.
Casing and Cover feature metal-to-metal fits with fully confined, controlled compression gasket to ensure proper sealing and alignment.
Raised Face Flanges are to ASME B16.5, Class 300 for one stage and Class 600 for two stage models.
ISO 21049/API 682 Seal Chamber accommodates a wide variety of seal configurations including dual pressurized and unpressurized cartridge types for the most severe services.
Stiff Shaft Design limits deflection at seal faces to 0.05 mm (0.002 in) max. Vibration levels are well below that required by ISO 13709/API 610. (insert period)
Heavy-Duty Motor Support Head features a registered fit motor mount and does not use spacer plates.
- Flows to 45 m3/h (200 gpm)
- Heads to 440 m (1455 ft)
- Pressures to 60 bar (870 psi)
- Temperatures to 260°C (500°F)
Showing all languages below...
Flowserve HWMA Pumps - Low-Flow, High-Head, Vertical In-line Process Pump With Bearing Housing - ISO 13709/API 610 (OH3) - HWMA2, WMA and WMA2 models included.
|说明:||MSP 是严格遵循 API 610 第 8 版设计标准的立式管道单级泵。以采用中速感应电机为特色的MSP泵，为低流量、高扬程的应用，提供高效、经济、简单安装，并减少维护。|
|说明:||福斯 PVML 泵是立式共轴式管道泵，完全符合 API 610 (OH5) 最新版标准。 此泵节省空间，无需对中，是上游和下游服务中许多悬臂流程泵的备选。|
|说明:||Fully compliant with ISO 13709/API 610 (OH2), latest edition, the HPXM is specifically designed for low flow, high head process applications.|
|说明:||The Flowserve PVXM vertical process pump features a diffuser design and a rugged in-line bearing housing. Compliant with the latest ISO 13709/API 610 and BS 4082R standards, the PVXM is a space-saving alternative to horizontal overhung process pumps in upstream and downstream services.|
|说明:||The WMA is a rigidly coupled, ISO 13709/API 610 OH4 design vertical in-line pump and features the same hydraulics as the HWMA. The WMA uses a P-base motor and is shorter in height than the ISO 13709/API 610 OH3 design of the HWMA.|
|说明:||The WMA2 is a two stage rigidly coupled pump designed to comply with API requirements for OH4 pumps. Like the HWMA2 pump, the high head hydraulics of the WMA2 are achieved using back-to-back, radial blade impellers and 2-pole P-base motors without high speed gear boxes.|
|说明:||The HWMA is a single stage, vertical in-line overhung pump with a separate bearing bracket. With its small footprint, this low flow, high head process pump is a space-saving alternative to many overhung process pumps in upstream and downstream services.|