HWMA ISO 13709/API 610 (OH3) Vertical In-line, Low-Flow, High-Head Overhung API Process Pump
The HWMA is a single stage, vertical in-line overhung pump with a separate bearing bracket. With its small footprint, this low flow, high head process pump is a space-saving alternative to many overhung process pumps in upstream and downstream services.
Clique para ampliar
1 image available
- Marcas:
IDP - Aplicativos:
Fluidos de transferência de calor, Gas to Liquids, Transferência de ácidos, Hidrogênio, Impulsor de alimentação de caldeira, Hidrotratamento, Craqueamento catalítico, LNG, Base alcalina do cloro, Leaching Acid, Chemical and Liquor (pulp and paper), Cooling Water (power), Plating, Galvanizing and Other Coatings, Residuum and Heavy Oil Upgrading, Dessalinização, Solventes, Digester, Volatile Organic Compounds, Distillation (oil and gas), Water Supply and Treatment (oil and gas), Drilling and Production, Water and CO2 Injection, FPSO, Gas Treating and Sulfur Recovery, Heavy Oil, Oil Sands and Shale - Indústrias:
Oil and Gas, Power Generation, Primary Metals, Mining, Water Resources, Chemical Processing, Indústrias gerais, Pulp and Paper - Normas:
API682, API610 - Miscelânea:
Replaceable Volute Insert permits precise hydraulic customization. Each insert is engineered for specified head and flow requirements. Accommodates future system changes.
Casing and Cover feature metal-to-metal fits with fully confined, controlled compression gasket to ensure proper sealing and alignment.
Raised Face Flanges are to ASME B16.5, Class 300 for one stage and Class 600 for two stage models.
ISO 21049/API 682 Seal Chamber accommodates a wide variety of seal configurations including dual pressurized and unpressurized cartridge types for the most severe services.
Stiff Shaft Design limits deflection at seal faces to 0.05 mm (0.002 in) max. Vibration levels are well below that required by ISO 13709/API 610.
Heavy-Duty Motor Support Head features a registered fit motor mount and does not use spacer plates.
Operating Parameters
- Flows to 45 m3/h (200 gpm)
- Heads to 220 m (725 ft)
- Pressures to 60 bar (870 psi)
- Temperatures to 260°C (500°F)
HWMA ISO 13709 API 610 (OH3) Vertical Inline, Low Flow, High Head Chart
HWMA ISO 13709 API 610 (OH3) Vertical Inline, Low Flow, High Head App
Showing all languages below...
Não há documentação para esse produto.WMA 13709/API 610 (OH4) Rigidly Coupled, Vertical In-line, Low-Flow, High-Head Process Pump
| Descrição: | The WMA is a rigidly coupled, ISO 13709/API 610 OH4 design vertical in-line pump and features the same hydraulics as the HWMA. The WMA uses a P-base motor and is shorter in height than the ISO 13709/API 610 OH3 design of the HWMA. |
|---|
WMA2 Two Stage, Rigidly Coupled, Vertical In-line, Low-Flow, High-Head Process Pump
| Descrição: | The WMA2 is a two stage rigidly coupled pump designed to comply with API requirements for OH4 pumps. Like the HWMA2 pump, the high head hydraulics of the WMA2 are achieved using back-to-back, radial blade impellers and 2-pole P-base motors without high speed gear boxes. |
|---|
PVXM 13709/API 610 (OH3) Vertical In-Line Overhung API Process Pump
| Descrição: | The Flowserve PVXM vertical process pump features a diffuser design and a rugged in-line bearing housing. Compliant with the latest ISO 13709/API 610 and BS 4082R standards, the PVXM is a space-saving alternative to horizontal overhung process pumps in upstream and downstream services. |
|---|
HWMA2 ISO 13709/API 610 (OH3) Vertical In-line, Low-Flow, High-Head Overhung API Process Pump
| Descrição: | Flowserve’s HWMA is a two stage, vertical in-line overhung pump with a separate bearing bracket. With its small footprint, this low flow, high head process pump is a space-saving alternative to many overhung process pumps in upstream and downstream services. |
|---|
MSP em balanço, em linha vertical, bomba de velocidade média
| Descrição: | Posterior à API 610, os critérios de projeto em sua 8ª edição, a MSP é uma bomba de único estágio vertical em linha. Com um motor de indução de velocidade média, o MSP proporciona eficiência máxima, excelente economia, instalação simplificada e manutenção reduzida em aplicações de baixo fluxo e cabeça alta. |
|---|
PVML API 610 (OH5), em balanço, bomba em linha vertical
| Descrição: | A bomba Flowserve PVML é um projeto vertical em linha acoplado, sendo totalmente compatível com a API 610 (OH5), edição mais recente. Essa bomba oferece uma alternativa sem alinhamento que economiza espaço para muitas bombas de processo em balanço nos serviços a montante e jusante. |
|---|
HPXM API 610 Low Flow, High Head Horizontal Process Pump
| Descrição: | Fully compliant with ISO 13709/API 610 (OH2), latest edition, the HPXM is specifically designed for low flow, high head process applications. |
|---|
Pronto para comprar?
1. Localize o contato de vendas Flowserve mais próximo de você, usando nosso localizador de contatos de vendas.
2. Ligue ou envie um e-mail para o contato de vendas da Flowserve e forneça as especificações solicitadas.
Ainda reunindo informações?
Para aprender mais sobre os produtos da Flowserve, assine nosso folheto informativo via e-mail.
