Durco Mark 3 ISO Self Priming, Overhung, Chemical Process Pump
Costing less to buy, install and maintain than submersible pumps, the Durco Mark 3 ISO Self Priming pump is designed to draw liquid from sources below ground level or from sources with no positive pressure to naturally prime the pump. Its compact design enables it to fit in tight clearance locations and to be trailer mounted.
Clique para ampliar
1 image available
- Marcas:
IDP, Flowserve, Durco - Aplicativos:
Drilling and Production, Polímeros, Electronics, Sewage Collection and Treatment, FPSO, Shipping, Transferência de ácidos, Processamento de alimentos, Slurry Processing, Agricultura, HVAC, Solventes, Automotive, Heavy Oil, Oil Sands and Shale, Volatile Organic Compounds, Auxiliary (chemical), Hydraulic Press (metals), Processamento de dejetos, Auxiliary Services (power), LNG, Water Supply and Distribution (water), Bleach Chemical (pulp and paper), Leaching Acid, Water Supply and Treatment (oil and gas), Base alcalina do cloro, Tratamento de água, Chemical and Liquor (pulp and paper), Nuclear Service, Coatings (pulp and paper), OEM, Construção, Offsites and Waste Treatment, Cooling Water (metals), Produtos farmacêuticos, Dessalinização, Plating, Galvanizing and Other Coatings, Dewatering and Water Supply (mining), Renewable Fuel Production - Indústrias:
Chemical Processing, Indústrias gerais, Mining, Water Resources, Power Generation, Primary Metals, Pulp and Paper, Oil and Gas - Normas:
ISO - Miscelânea:
One-Piece Casing has large priming chamber, air separator and volute in one integral component, keeping components to a minimum.
Reflux Priming Principle eliminates the need for internal valves and external priming devices.
Standard Semi-Open Impeller delivers high-efficiency performance, provides low NPSHR and offers good solids handling.
Run Dry Capability allows for minimal supervision.
SealSentry Seal Chambers extend seal life and provide advanced self-flushing capability.
External Micrometer Impeller Adjustment Mechanism accurately sets impeller clearance in 20 seconds, in the shop or in the field.
Back Pullout Design allows removal of rotating element without removing casing, piping or motor.
Operating Parameters
- Flows to 100 m3/h (440 gpm)
- Heads to 100 m (330 ft)
- Pressures to 25 bar (365 psi)
- Temperatures from -80°C (-110°F) to 350°C (660°F)
Showing all languages below...
CPX - Bombas de proceso químico ISO
CPX Bombas de proceso químico ISO - CPX - CPXS - CPXM - CPXP - CPXR - CPXV
CPX Pump Bulletin
Flowserve CPX Pumps - ISO Chemical Process Pump - CPX, CPXS,CPXM, CPXP, CPXP, CPXV
CPX - Pompes process-chimie ISO
CPX - Pompes process-chimie ISO - CPX - CPXS - CPXM - CPXP - CPXR - CPXV
Bombas de geração de energia
Flowserve Geração de Energia: Ciclo Combinado, Combustíveis Fósseis, Nucle
Produzione di energia
Flowserve Produzione di energia: Cicli combinati, Combustibili fossili, Nucleare
Production d' énergie
Flowserve Production d’ énergie: Cycle Combiné, Combustible fossile, Nucléaire
Oil & Gas Market Bulletin
Oil & Gas: Production and Pumpline pumps-offshore, onshore, synthetic crude, and liquid natural gas
Öl & Gas
Flowserve Öl & Gas: Produktion, Pipeline - Offshore, Onshore, Synthetisches Rohöl, Flüssignaturgas
Petróleo e Gás
Flowserve Petróleo e Gás: Produção e Oleodutos - Offshore, Onshore, Petróleo, GLP - Gás Liquefeito de Petróleo
Oil & Gas Market Bulletin
Flowserve Oil and Gas: Production and Pipeline Pumps - Offshore, Onshore, Sythetic Crude, Liquid Natural Gas
Petrolio e Gas
Flowserve Petrolio e gas: Esplorazione e produzione, Oleodotti - Offshore, Onshore, Greggio sintetico, Gas naturale liquefatto
Energía solar concentrada
Flowserve Energía solar concentrada - Colector parabólico - Torre de concentración
Chemical Processing Pumps
Flowserve Pumps for Chemical Processing - Process, Heat transfer, Effluent Treatment, Auxiliary
Chemieprozesse Pumpen
Flowserve Chemieprozesse: Prozess, Wärmetauscher, Abwasseraufbereitung, Hilfssysteme
Chemical Processing Pumps
Flowserve Pumps for Chemical Processing - Process, Heat transfer, Effluent Treatment, Auxiliary
CPX Pump Bulletin
Flowserve CPX Pumps - ISO Chemical Process Pumps - CPX, CPXS, CPXM, CPXP, CPXR, CPXV
Power Generation Pumps
Flowserve Pumps for Power Generation - Combined cycle, fossil fuels and nuclear
Petróleo e Gás
Flowserve Petróleo e Gás: Produção e Oleodutos - Offshore, Onshore, Petróleo, GLP - Gás Liquefeito de Petróleo
Durco Mark 3 ISO Frame Mounted Pumps User Instructions
Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps
Pulp and Paper Pumps
Flowserve Pumps for Pulp and Paper - Pulp Production, Chemical Recovery, Paper Stock Preparation, Paper Manufacturing, Mill and Environmental Services
Concentrated Solar Power Pumps
Flowserve Pumps for Concentrated Solar Power - Parabolic Trough, Power Tower
Chemical Processing Pumps
Flowserve Pumps for Chemical Processing - Process, Heat Transfer, Effluent Treatment, Auxiliary
CPXV ISO em balanço, bomba vertical para poço
| Descrição: | Oferecendo uma hidráulica excelente, as bombas verticais para poço CPXV ISO foram projetadas para aplicações em que são necessários alto desempenho, eficiência superior e baixo NPSH. As bombas CPXV ISO estão de acordo com os critérios de projeto ISO 5199. |
|---|
CPXS ISO em balanço, bomba de processo de acionamento magnético
| Descrição: | Compatíveis com os padrões dimensionais e técnicos ISO 2858 e os critérios de projeto ISO 5199, a bomba de processo de acionamento magnético CPXS oferece bombeamento sem vazamento de líquidos perigosos, tóxicos, inflamáveis, explosivos ou apenas valiosos. |
|---|
Durco Mark 3 ISO Close Coupled, Overhung, Chemical Process Pump
| Descrição: | With pump ends conforming to ISO 2858 dimensional and technical standards as well as ISO 5199 design criteria, the Durco Mark 3 ISO Close Coupled pump provides a compact, space-saving arrangement ideal for industrial processes or installations where space is at a premium. |
|---|
Durco Mark 3 ISO Overhung, Chemical Process Pump
| Descrição: | Conforming to ISO 2858 dimensional and ISO 5199 design criteria and incorporating advanced features, the Durco Mark 3 ISO chemical process pump provides unmatched performance and reliability. This ruggedly designed pump offers significant operational and maintenance enhancing benefits to minimize the total cost of pump ownership. |
|---|
Durco Mark 3 ISO Recessed Impeller, Overhung, Chemical Process Pump
| Descrição: | The Durco Mark 3 ISO Recessed Impeller pump provides low-shear pumping of friable solids and trouble-free pumping of stringy or fibrous slurries. Solids are drawn into the vortex of swirling liquid and discharged by centrifugal force with only a fraction of the media contacting the impeller. |
|---|
Mark 3 padrão ANSI, bomba em balanço
| Descrição: | A bomba Flowserve Mark 3 é reconhecida como sendo a líder mundial em bombas de processo químico ANSI. Esse projeto ANSI B73.1M oferece os recursos projetados mais avançados do setor, tendo em vista o máximo de MTBPM (Mean Time Between Planned Maintenance). |
|---|
Pronto para comprar?
1. Localize o contato de vendas Flowserve mais próximo de você, usando nosso localizador de contatos de vendas.
2. Ligue ou envie um e-mail para o contato de vendas da Flowserve e forneça as especificações solicitadas.
Ainda reunindo informações?
Para aprender mais sobre os produtos da Flowserve, assine nosso folheto informativo via e-mail.
