Hydraulic Decoking Systems Drill Stem Guide and Shroud Assembly
The Flowserve drill stem guide and shroud can accommodate up to 305 mm (12 inches) of overall lateral misalignment. The innovative design rides on the drill stem and fully encloses the cutting tool. It diverts dangerous water flow vertically away from operators in the unlikely event a pressurized cutting tool is retracted from the drum or energized while stowed.
Decoking, Petroleum Production and Refining
Delayed Coking, Heavy Oil and Upgrading
Features and Benefits
- Fully enclosed 9.5 mm (0.375 inch) thick carbon steel shroud
- Open top allows steam and gas to escape in event of a hot spot blowout
- Can be installed without field welding and without unit shutdown
- Self-aligning, accommodating up to 305 mm (12 inches) of lateral misalignment
- Auto-latching / unlatching feature available; actuation by lowering and raising of drill stem is available
- Loosely mounted on drill stem to permit insertion of the cutting tool into the drum
Showing all languages below...
Flowserve Sistema de Equipos de Corte de Coke - "Innovación del líder mundial en descarbonización hidráulica" (11" x 17")
Flowserve poster de Descoqueamento - "Inovação do Líder Global em Descoqueamento Hidráulico" (11" x 17")
Flowserve Decoking Poster - Innovation from the Global Leader in Hydraulic Decoking (36" x 24")
Оборудование систем гидравлического коксоудаления
Equipo de sistemas de decoquización hidráulica
Equipamento para Sistemas de Descoqueamento Hidráulico
Remote and Automated Hydraulic Decoking Systems
Flowserve Decoking Poster - Innovation from the Global Leader in Hydraulic Decoking (11" x 17")
Flowserve Hydraulic Decoking Systems - Tool Enclosure and Stem Guide
|Description:||The crosshead and free fall arrestor unit guides and centers the rotary joint-drill stem-cutting tool assembly in the coke drum. The crosshead is designed to safely absorb all torque loads normally sustained from cutting operations.|
|Description:||The Flowserve compression type tensiometer replaces typical designs used for measuring cable tension. The result is a more practical load measurement system with many safety, operation and maintenance advantages.|
|Description:||Flowserve latch mechanisms enable stowing of the crosshead when not in use, providing a safe and practical way to remove tension on the cable and winch.|
|Description:||Flowserve threaded drill stems are extremely durable for decoking service with a side load strength four times greater than comparable welded drill stem designs.|
|Description:||Flowserve coke drum monitoring systems provide coke cutting personnel with positive confirmation that the coke has been removed and the cutting process can continue. The system can be integrated with the decoking control system for maximum ease-of-use or provided as a stand-alone option.|
|Description:||Audio monitoring systems provide critical feedback to operators and are an essential part of remotely operated coke cutting systems from Flowserve.|
|Description:||Video monitoring systems provide critical feedback to operators and are an essential part of remotely operated coke cutting systems from Flowserve.|
|Description:||The lifting mechanism for the drill string utilizes multiple blocks and sheaves built to Flowserve specifications. Multiple sizes and load ratings are available to meet specific unit requirements.|
|Description:||Flowserve decoking hoses are designed for the harsh environment of the delayed coker. These high-pressure hoses are oil and chemical resistant and feature abrasive-resistant outer covers with multiple layers of wire reinforcement for strength and durability.|
|Description:||The decoking operating system utilizes state-of the-art programmable controllers, monitoring equipment, and field devices with over 20 years of field-proven design techniques.|
|Description:||The Flowserve Pacific® heavy-duty rotary joint is robustly designed to support the suspended loads experienced in coking units. Its function is to transmit cutting fluid from the stationary hose connection to the drill stem and cutting tool. Flowserve is continually upgrading its rotary joint to accommodate increasingly higher cutting pressure requirements.|
|Description:||The Flowserve decoking control valve controls the flow from the jet pump with a single valve providing three distinct features: recirculation flow control, pre-fill and full flow to the decoking tool nozzles.|
|Description:||Built to meet or exceed ISO 13709/API 610 (BB5), latest design, the WIK is a multistage, double-case barrel pump. Its unique low specific speed hydraulics and extra heavy-duty design are especially engineered for reliable service in jet pump decoking services. The WIK is intended for special purpose, unspared, high-power density and extremely arduous conditions.|
|Description:||The AutoShift combination decoking tool makes remote drum decoking feasible by removing the operator from the cutting deck. Boring and cutting mode shifting is accomplished automatically and safely within the drum by water pressurization and depressurization.|
|Description:||Customized decoking ball valves are used to manage cutting water flow to the coke drums and to relieve drum pressure. The valve designs incorporate unique features that provide long life and safe operations.|
|Description:||The decoking winch is specifically designed for use in coke cutting to raise and lower the cutting tool in the coke drums. Several unique features are incorporated to assure safe, reliable operation in the most demanding environments.|
Ready to buy?
1. Find your closest Flowserve sales contact by using our global sales contacts locator.
2. Call or email the Flowserve sales contact and provide your required specifications.
Still gathering information?
To learn more about Flowserve products, subscribe to our e-mail newsletter.