Durco Mark 3 ISO Self Priming, Overhung, Chemical Process Pump

Costing less to buy, install and maintain than submersible pumps, the Durco Mark 3 ISO Self Priming pump is designed to draw liquid from sources below ground level or from sources with no positive pressure to naturally prime the pump. Its compact design enables it to fit in tight clearance locations and to be trailer mounted.

Click to enlarge
1 image available

  • Brands:
    Durco
  • Applications:
    Dewatering and Water Supply (mining), Plating, Galvanizing and Other Coatings, Drilling and Production, Renewable Fuel Production, Electronics, Sewage Collection and Treatment, FPSO, Shipping, Acid Transfer, Food Processing, Slurry Processing, Agriculture, HVAC, Solvents, Automotive, Heavy Oil, Oil Sands and Shale, Volatile Organic Compounds, Auxiliary (chemical), Hydraulic Press (metals), Waste Processing, Auxiliary Services (power), LNG, Water Supply and Distribution (water), Bleach Chemical (pulp and paper), Leaching Acid, Water Supply and Treatment (oil and gas), Caustic and Chlor-alkali, Water Treatment, Chemical and Liquor (pulp and paper), Nuclear Service, Coatings (pulp and paper), OEM, Construction, Offsites and Waste Treatment, Cooling Water (metals), Pharmaceuticals, Desalination, Polymers
  • Industries:
    Pulp and Paper, Water Resources, Chemical Processing, Primary Metals, Mining, Oil and Gas, Power Generation, General Industries
  • Standards:
    ISO

One-piece Casing has large priming chamber, air separator and volute in one integral component, keeping components to a minimum.

Reflux Priming Principle eliminates the need for internal valves and external priming devices.

Standard Semi-open Impeller delivers high efficiency performance, provides low NPSHR and offers good solids handling.

Run Dry Capability allows for minimal supervision.

SealSentry Seal Chambers extend seal life and provide advanced self-flushing capability.

Two-piece, Ductile Iron Bearing Housing is designed for safety, strength, interchangeability and retrofit capability.

External Micrometer Impeller Adjustment Mechanism accurately sets impeller clearance in 20 seconds, in the shop or the field.

IPS Beacon power end condition monitor provides a visual signal that a current or past alert condition has occurred.

Back Pull-out Design allows removal of rotating element without removing casing, piping or motor.

Operating Parameters

  • Flows to 100 m3/h (440 gpm)
  • Heads to 100 m (330 ft)
  • Pressures to 25 bar (365 psi)
  • Temperatures from -80°C (-110°F) to 400°C (752°F)

Show/hide all languages

Showing all languages below...

Bombas de energía solar concentrada

Select format:
8.5 x 11
A4

Flowserve Bombas de energía solar concentrada - Colector parabólico - Torre de concentración

Bomba de Proceso Químico Durco® Mark 3™ ISO

Select format:
8.5 x 11
A4

Bomba de Proceso Químico Durco® Mark 3™ ISO - ISO 2858/5199

Mark 3™ ISO značky Durco® Chemické procesní čerpadlo

Mark 3™ ISO značky Durco® Chemické procesní čerpadlo - ISO 2858/5199

Durco® Mark 3™ ISO Procesowe pompy chemiczne

Durco® Mark 3™ ISO Procesowe pompy chemiczne - ISO 2858/5199

Pompe process chimie Durco® Mark 3™ ISO

Pompe process chimie Durco® Mark 3™ ISO - ISO 2858/5199

Durco® Mark 3™ ISO 化工流程泵

Durco® Mark 3™ ISO 化工流程泵 - ISO 2858/5199

Bomba de Processo Químico Durco® Mark 3™ ISO

Bomba de Processo Químico Durco® Mark 3™ ISO - ISO 2858/5199

Durco® Mark 3™ ISO Насос для химических процессов

Durco® Mark 3™ ISO Насос для химических процессов - ISO 2858/5199

Bomba de Proceso Químico Durco® Mark 3™ ISO

Select format:
8.5 x 11
A4

Bomba de Proceso Químico Durco® Mark 3™ ISO - ISO 2858/5199

Durco® Mark 3™ ISO Chemieprozesspumpe

Durco® Mark 3™ ISO Chemieprozesspumpe - ISO 2858/5199

Bombas de Mineração e de Processamento de Minérios

Bombas de Mineração e de Processamento de Minérios - Beneficiamento * Hidrometalurgia - Refino

Bombas para minería y para procesamiento de mineral

Select format:
8.5 x 11
A4

Flowserve Bombas para minería y para procesamiento de mineral - Beneficio - Hidrometalurgia - Refinado

Desalination Products Market Bulletin

فلوسيرف مضخات تحلية المياه - التناضح العكسي - متعددة المراحل فلاش - التقطير متعدد التأثير

除盐市场公告

Flowserve 除盐泵 – 用于逆渗透、多级闪蒸和多效蒸馏的泵

Equipos para sistemas de desalinización mediante ósmosis inversa

Select format:
8.5 x 11
A4

Equipos para sistemas de desalinización mediante ósmosis inversa - Bombas - Dispositivos de recuperación de energía - Válvulas - Sellos mecánicos

Équipement pour systèmes de désalinisation par osmose inverse

Flowserve Équipement pour systèmes de désalinisation par osmose inverse - Pompes - Dispositifs de récupération d’énergie - Vannes - Garnitures d’étanchéité

Durco® Mark 3™ ISO Checklist de Manutenção

Flowserve Durco® Mark 3™ ISO - ISO 2858/5199

Durco® Mark 3™ ISO Mantenimiento - Listado de puntos a verificar

Flowserve Durco® Mark 3™ ISO - ISO 2858/5199

Marca Registrada Durco 3 ISO Lista de Verificacion de Mantenimiento

Flowserve Marca Registrada Durco 3 ISO - ISO 2858/5199

Durco® Mark 3™ ISO Liste des contrôles de maintenance

Flowserve Durco® Mark 3™ ISO - ISO 2858/5199

Durco® Mark 3™ ISO Wartungscheckliste

Flowserve Durco® Mark 3™ ISO - ISO 2858/5199

Durco® Mark 3™ ISO Список работ по обслуживанию

Flowserve Durco® Mark 3™ ISO Pump - ISO 2858/5199

Durco® Mark 3™ ISO 维护清单

Flowserve Durco® Mark 3™ ISO - ISO 2858/5199

المعالجة الكيميائية مضخات

فلوسيرف مضخات المعالجة الكيميائية - عملية - انتقال الحرارة - معالجة الصرف - مساعدة

化学处理泵

Flowserve 化学加工泵 – 用于加工、热转换、排泄处理和辅助的泵

Bombas de Processamento de Produtos Químicos

Processamento de Produtos Químicos - Processamento - Transferência de Calor-Tratamento de Efluentes - Auxiliares

Chemieprozesse Pumpen

Flowserve Chemieprozesse: Prozess, Wärmetauscher, Abwasseraufbereitung, Hilfssysteme

Химическая обработка Насосы

Flowserve Насосы для химической переработки - Процесс - Heat Transfer - Очистка сточных вод - Auxiliary

Power Generation Pumps

Select format:
8.5 x 11
A4

Flowserve Pumps for Power Generation - Combined cycle, fossil fuels and nuclear

Durco Mark 3 ISO Frame Mounted Pumps User Instructions

Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps

Pulp and Paper Pumps

Select format:
8.5 x 11
A4

Flowserve Pumps for Pulp and Paper - Pulp Production, Chemical Recovery, Paper Stock Preparation, Paper Manufacturing, Mill and Environmental Services

Concentrated Solar Power Pumps

Select format:
8.5 x 11
A4

Flowserve Pumps for Concentrated Solar Power - Parabolic Trough - Power Tower

Ethanol Production Pumps

Select format:
8.5 x 11
A4

Flowserve Pumps for Ethanol Production

Durco® Mark 3™ ISO Pumps Bulletin

Select format:
8.5 x 11
A4

Flowserve Durco® Mark 3™ ISO Pumps - Chemical Process Pump - ISO 2858/5199

Mining and Mineral Processing Pumps

Select format:
8.5 x 11
A4

Flowserve Mining and Mineral Processing Pumps- Beneficiation - Hydrometallurgy - Refining

Desalination Pumps

Select format:
8.5 x 11
A4

Flowserve Pumps for Desalination - Reverse Osmosis - Multistage Flash - Multi-Effect Distillation

CO2 Capture, Transportation, and Storage Pumps

Select format:
8.5 x 11
A4

Flowserve CO2 Capture, Transportation, and Storage Pumps - Pre-Combustion, Post-Combustion, Pipeline, Injection

Equipment for Reverse Osmosis Desalination Systems

Select format:
8.5 x 11
A4

Flowserve Equipment for Reverse Osmosis Desalination Systems - Pumps - Energy Recovery Devices - Valves - Seals

Durco® Mark 3™ ISO Pump Maintenance Checklist

Flowserve Durco® Mark 3™ ISO Pump - ISO 2858/5199

Genuine Flowserve Replacement Parts Bullletin

Select format:
8.5 x 11
A4

Genuine Flowserve Replacement Parts Bulletin - Chemical Process Pumps

Durco Mark 3 ISO Frame Mounted Pumps User Instructions

Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps

Durco Mark 3 ISO Frame Mounted Pumps User Instructions C

Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps

Durco Mark 3 ISO Frame Mounted Pumps User Instructions

Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps

Durco Mark 3 ISO Frame Mounted Pumps User Instructions

Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps

Durco Mark 3 ISO Frame Mounted Pumps User Instructions

Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps

Durco Mark 3 ISO Frame Mounted Pumps User Instructions

Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps

Durco Mark 3 ISO Frame Mounted Pumps User Instructions

Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps

Durco Mark 3 ISO Frame Mounted Pumps User Instructions

Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps

Chemical Processing Pumps

Select format:
8.5 x 11
A4

Flowserve Pumps for Chemical Processing - Process - Heat Transfer - Effluent Treatment - Auxiliary

CPXV ISO and API Chemical Sump Pump

Description: Compliant with ISO 5199, the CPXV is a vertical sump pump incorporating state-of-the-art hydraulic design for efficient and reliable service. It is highly customizable to meet a wide range of needs. And, for oil and gas installations, the CPXV is available with many ISO 13709/API 610 compliant features.

CPXS Magnetic Drive, Overhung, Chemical Process Pump

Description: The CPXS Magnetic Drive pump provides leak-free pumping of hazardous, toxic, flammable, explosive or valuable liquids. Conforming to ISO 2858 dimensional and ISO 15783 design criteria, the CPXS Magnetic Drive pump is found wherever reliability in severe services is a requirement.

Durco Mark 3 ISO Close Coupled, Overhung, Chemical Process Pump

Description: With pump ends conforming to ISO 2858 and ISO 5199 design criteria, the Durco Mark 3 ISO Close Coupled pump provides a compact, space-saving arrangement ideal for industrial processes or installations where space is at a premium.

Durco Mark 3 ISO Overhung, Chemical Process Pump

Description: Conforming to ISO 2858 and ISO 5199 design criteria and incorporating advanced design features, the Durco Mark 3 ISO chemical process pump provides unmatched performance and reliability. This ruggedly designed pump offers significant operational and maintenance-enhancing benefits to minimize the total cost of pump ownership.

Durco Mark 3 ISO Recessed Impeller, Overhung, Chemical Process Pump

Description: The Durco Mark 3 ISO Recessed Impeller pump provides low-shear pumping of friable solids and trouble-free pumping of stringy or fibrous slurries. Solids are drawn into the vortex of swirling liquid and discharged by centrifugal force, with only a fraction of the media contacting the impeller.

Mark 3 ASME (ANSI) Standard Overhung Chemical Process Pump

Description: The Durco Mark 3 pump is recognized as the worldwide leader in ANSI chemical process pumps. This ASME (ANSI) B73.1 design offers the industry's most advanced design features for maximum Mean Time Between Planned Maintenance (MTBPM).

Ready to buy?

1. Find your closest Flowserve sales contact by using our global sales contacts locator.

2. Call or email the Flowserve sales contact and provide your required specifications.

Still gathering information?

To learn more about Flowserve products, subscribe to our e-mail newsletter.

  
Ask a Question

Required Fields












Please choose which of the following best describes you: