Durco Mark 3 ISO Recessed Impeller, Overhung, Chemical Process Pump
The Durco Mark 3 ISO Recessed Impeller pump provides low-shear pumping of friable solids and trouble-free pumping of stringy or fibrous slurries. Solids are drawn into the vortex of swirling liquid and discharged by centrifugal force, with only a fraction of the media contacting the impeller.
Haga clic para agrandar la imagen
1 image available
- Marcas:
Durco - Aplicaciones:
Hydraulic Press (metals), HVAC, Leach Fields, Agriculture, Leaching Acid, Automotive, OEM, Auxiliary (chemical), Pharmaceuticals, Auxiliary Services (power), Plating, Galvanizing and Other Coatings, Bleach Chemical (pulp and paper), Polymers, Caustic and Chlor-alkali, Renewable Fuel Production, Chemical and Liquor (pulp and paper), Sewage Collection and Treatment, Coatings (pulp and paper), Shipping, Construction, Slurry Processing, Desalination, Solvents, Dewatering and Water Supply (mining), Waste Processing, Electronics, Water Supply and Distribution (water), Food Processing, Water Treatment, Acid Transfer - Industrias:
Chemical Processing, General Industries, Mining, Water Resources, Primary Metals, Pulp and Paper, Power Generation - Normas:
ISO - Misceláneo:
Vortex Action causes only a fraction of the media to contact the impeller, minimizing abrasive wear and maintaining solids integrity.
Standard Semi-open Impeller in CD4MCuN duplex stainless steel provides excellent corrosion and wear resistance.
SealSentry Seal Chambers extend seal life and provide advanced self-flushing capability.
Two-piece, Ductile Iron Bearing Housing is designed for safety, strength, interchangeability and retrofit capability.
External Micrometer Impeller Adjustment Mechanism accurately sets impeller clearance in 20 seconds, in the shop or the field.
IPS Beacon power end condition monitor provides a visual signal that a current or past alert condition has occurred.
Back Pull-out Design allows removal of rotating element without removing casing, piping or motor.
Operating Parameters
- Flows to 750 m3/h (3300 gpm)
- Heads to 100 m (330 ft)
- Pressures to 25 bar (365 psi)
- Temperatures from -80°C (-110°F) to 400°C (752°F)
Showing all languages below...
Marca Registrada Durco 3 ISO Lista de Verificacion de Mantenimiento
Flowserve Marca Registrada Durco 3 ISO - ISO 2858/5199
Durco® Mark 3™ ISO Mantenimiento - Listado de puntos a verificar
Flowserve Durco® Mark 3™ ISO - ISO 2858/5199
Produzione di energia
Flowserve Produzione di energia: Cicli combinati, Combustibili fossili, Nucleare
Production d' énergie
Flowserve Production d’ énergie: Cycle Combiné, Combustible fossile, Nucléaire
Bombas de geração de energia
Flowserve Geração de Energia: Ciclo Combinado, Combustíveis Fósseis, Nucle
Chemical Processing Pumps
Flowserve Pumps for Chemical Processing - Process, Heat transfer, Effluent Treatment, Auxiliary
Chemical Processing Pumps
Flowserve Pumps for Chemical Processing - Process, Heat transfer, Effluent Treatment, Auxiliary
Processamento de Produtos Químicos
Processamento de Produtos Químicos - Processamento - Transferência de Calor-Tratamento de Efluentes - Auxiliares
Chemieprozesse Pumpen
Flowserve Chemieprozesse: Prozess, Wärmetauscher, Abwasseraufbereitung, Hilfssysteme
Bombas para minería y para procesamiento de mineral
Flowserve Bombas para minería y para procesamiento de mineral - Beneficio - Hidrometalurgia - Refinado
Durco® Mark 3™ ISO Насос для химических процессов
Flowserve Durco® Mark 3™ ISO Насос для химических процессов - ISO 2858/5199
Mark 3™ ISO značky Durco® Chemické procesní čerpadlo
Mark 3™ ISO značky Durco® Chemické procesní čerpadlo - ISO 2858/5199
Pompe process chimie Durco® Mark 3™ ISO
Flowserve Pompe process chimie Durco® Mark 3™ ISO - ISO 2858/5199
Durco® Mark 3™ ISO Chemieprozesspumpe
Flowserve Durco® Mark 3™ ISO Chemieprozesspumpe - ISO 2858/5199
Bomba de Proceso Químico ISO Durco® Mark 3™
Flowserve Bomba de Proceso Químico ISO Durco® Mark 3™ - ISO 2858/5199
Bomba de Processo Químico Durco® Mark 3™ ISO
Flowserve Bomba de Processo Químico Durco® Mark 3™ ISO - ISO 2858/5199
Bomba de proceso Durco® Mark 3™ ISO
Flowserve Bomba de proceso Durco® Mark 3™ ISO para la Industria Química - ISO 2858/5199
Genuine Flowserve Replacement Parts Bullletin
Genuine Flowserve Replacement Parts Bulletin - Chemical Process Pumps
Durco Mark 3 ISO Frame Mounted Pumps User Instructions C
Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps
Durco Mark 3 ISO Frame Mounted Pumps User Instructions
Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps
Durco Mark 3 ISO Frame Mounted Pumps User Instructions
Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps
Durco Mark 3 ISO Frame Mounted Pumps User Instructions
Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps
Durco Mark 3 ISO Frame Mounted Pumps User Instructions
Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps
Durco Mark 3 ISO Frame Mounted Pumps User Instructions
Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps
Durco Mark 3 ISO Frame Mounted Pumps User Instructions
Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps
Durco Mark 3 ISO Frame Mounted Pumps User Instructions
Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps
Power Generation Pumps
Flowserve Pumps for Power Generation - Combined cycle, fossil fuels and nuclear
Chemical Processing Pumps
Flowserve Pumps for Chemical Processing - Process, Heat Transfer, Effluent Treatment, Auxiliary
Pulp and Paper Pumps
Flowserve Pumps for Pulp and Paper - Pulp Production, Chemical Recovery, Paper Stock Preparation, Paper Manufacturing, Mill and Environmental Services
Mining and Mineral Processing Pumps Bulletin
Flowserve Pumps for Mining and Mineral Processing - Beneficiation, Hydrometallurgy and Refining
Durco® Mark 3™ ISO Pumps Bulletin
Flowserve Durco® Mark 3™ ISO Pumps - Chemical Process Pump - ISO 2858/5199
Durco Mark 3 ISO Frame Mounted Pumps User Instructions
Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps
CPXV ISO and API Chemical Sump Pump
| Descripción: | Compliant with ISO 5199, the CPXV is a vertical sump pump incorporating state-of-the-art hydraulic design for efficient and reliable service. It is highly customizable to meet a wide range of needs. And, for oil and gas installations, the CPXV is available with many ISO 13709/API 610 compliant features. |
|---|
CPXS Magnetic Drive, Overhung, Chemical Process Pump
| Descripción: | The CPXS Magnetic Drive pump provides leak-free pumping of hazardous, toxic, flammable, explosive or valuable liquids. Conforming to ISO 2858 dimensional and ISO 15783 design criteria, the CPXS Magnetic Drive pump is found wherever reliability in severe services is a requirement. |
|---|
Durco Mark 3 ISO Overhung, Chemical Process Pump
| Descripción: | Conforming to ISO 2858 and ISO 5199 design criteria and incorporating advanced design features, the Durco Mark 3 ISO chemical process pump provides unmatched performance and reliability. This ruggedly designed pump offers significant operational and maintenance-enhancing benefits to minimize the total cost of pump ownership. |
|---|
Durco Mark 3 ISO Self Priming, Overhung, Chemical Process Pump
| Descripción: | Costing less to buy, install and maintain than submersible pumps, the Durco Mark 3 ISO Self Priming pump is designed to draw liquid from sources below ground level or from sources with no positive pressure to naturally prime the pump. Its compact design enables it to fit in tight clearance locations and to be trailer mounted. |
|---|
Durco Mark 3 ISO Close Coupled, Overhung, Chemical Process Pump
| Descripción: | With pump ends conforming to ISO 2858 and ISO 5199 design criteria, the Durco Mark 3 ISO Close Coupled pump provides a compact, space-saving arrangement ideal for industrial processes or installations where space is at a premium. |
|---|
Mark 3 ASME Standard Overhung Chemical Process Pump
| Descripción: | The Durco Mark 3 pump is recognized as the worldwide leader in ANSI chemical process pumps. This ANSI B73.1M design offers the industry's most advanced design features for maximum Mean Time Between Planned Maintenance (MTBPM). |
|---|
¿Listo para comprar?
1. Encuentre su contacto de ventas de Flowserve más cercano al utilizar nuestro localizador de contactos de ventas global.
2. Llame o envíe un correo electrónico al contacto de ventas de Flowserve para informarle acerca de la información solicitada.
¿Sigue buscando información?
Para conocer más acerca de los productos de Flowserve, subscríbase a nuestro boletín informativo por correo electrónico.
