Gas Treating and Sulfur Recovery
Durco Mark 3 ISO Close Coupled, Overhung, Chemical Process Pump
| Marca | Durco, IDP, Flowserve |
|---|---|
| Descripción | With pump ends conforming to ISO 2858 dimensional and technical standards as well as ISO 5199 design criteria, the Durco… |
Durco Mark 3 ISO Overhung, Chemical Process Pump
| Marca | Durco, IDP, Flowserve |
|---|---|
| Descripción | Conforming to ISO 2858 dimensional and ISO 5199 design criteria and incorporating advanced features, the Durco Mark 3 ISO… |
HPX Hydrocarbon Processing Pump
| Marca | IDP |
|---|---|
| Descripción | Engineered and built for reliable, safe performance, the HPX also provides optimal emissions containment. This pump represents… |
IPS APEX™
| Marca | Flowserve |
|---|---|
| Descripción | IPS APEX is the industry's most sophisticated tool for data acquisition, diagnostics and intelligent control. The IPS APEX… |
IPS Power Monitor™
| Marca | Flowserve |
|---|---|
| Descripción | The IPS Power Monitor (model KW941) monitors and displays actual power to the rotating equipment. The IPS Power Monitor is… |
IPS Tempo™
| Marca | Flowserve |
|---|---|
| Descripción | The IPS Tempo is a user-friendly, variable frequency drive (VFD) with pre-engineered optimization, protection and control… |
WMA 13709/API 610 (OH4) Rigidly Coupled, Vertical In-line, Low-Flow, High-Head Process Pump
| Marca | IDP |
|---|---|
| Descripción | The WMA is a rigidly coupled, ISO 13709/API 610 OH4 design vertical in-line pump and features the same hydraulics as the… |
WMA2 Two Stage, Rigidly Coupled, Vertical In-line, Low-Flow, High-Head Process Pump
| Marca | IDP |
|---|---|
| Descripción | The WMA2 is a two stage rigidly coupled pump designed to comply with API requirements for OH4 pumps. Like the HWMA2 pump,… |
VPC Vertical Turbine, Double Case Pump
| Marca | Worthington |
|---|---|
| Descripción | The VPC vertical turbine, double casing pump is a diffuser type, single or multistage design for services with limited NPSH… |
LPN ISO 13709/API 610 (BB1) Between Bearings, Single Case, Axially Split, Double Suction, Single Stage Pump
| Marca | IDP |
|---|---|
| Descripción | Fully compliant with the latest ISO 13709/API 610 (BB1) standards, the Flowserve LPN axial split case, medium pressure pump… |
PVML 13709/API 610 (OH5) Vertical In-Line Overhung API Process Pump
| Marca | Flowserve |
|---|---|
| Descripción | The Flowserve PVML pump is a vertical, close coupled, in-line design and is fully compliant with the latest API 610 (OH5)… |
PVXM 13709/API 610 (OH3) Vertical In-Line Overhung API Process Pump
| Marca | Flowserve |
|---|---|
| Descripción | The Flowserve PVXM vertical process pump features a diffuser design and a rugged in-line bearing housing. Compliant with… |
Mark 3 ASME Standard Overhung Chemical Process Pump
| Marca | Durco |
|---|---|
| Descripción | The Durco Mark 3 pump is recognized as the worldwide leader in ANSI chemical process pumps. This ANSI B73.1M design offers… |
CPX ISO Overhung, Single Stage Process Pump
| Marca | IDP |
|---|---|
| Descripción | Conforming to ISO 2858 dimensional and ISO 5199 design criteria and incorporating advanced features, the CPX chemical process… |
DVSH ISO 13709/API 610 (BB1) Between Bearings, Single Case, Axially Split, Single Stage Pump
| Marca | Byron Jackson, United Centrifugal |
|---|---|
| Descripción | With tens of thousands of units in operation around the world, the DVSH is the undisputed between bearings, axially split,… |
Bomba de dos etapas, partida axialmente, entre cojinete UZDL API 610 (BB1)
| Marca | IDP, Worthington |
|---|---|
| Descripción | La UZDL es una bomba de dos etapas, partida axialmente, diseñada según la última edición de API 610 (BB1). Con un impulsor… |
Mark 3 Unitized Self-Primer
| Marca | Durco |
|---|---|
| Descripción | The Durco Mark 3 Unitized Self-Priming pump is engineered to draw from liquid sources below ground level or from sources… |
CPXM ISO Overhung, Close Coupled, Process Pump
| Marca | |
|---|---|
| Descripción | Offering state-of-the-art hydraulics and a compact, space saving arrangement, the CPXM pump is designed for applications… |
HPXM API 610 Low Flow, High Head Horizontal Process Pump
| Marca | IDP |
|---|---|
| Descripción | Fully compliant with ISO 13709/API 610 (OH2), latest edition, the HPXM is specifically designed for low flow, high head process… |
MSP Vertical In-Line, Medium Speed, Overhung API Process Pump
| Marca | Flowserve |
|---|---|
| Descripción | Closely following API 610, 8th Edition design criteria, the MSP is a vertical, in-line, single stage pump. Featuring a medium… |
