Titan™ Slurry Heavy-Duty, Overhung, Radially Split, Lined Pump
The Flowserve Titan Slurry pump is a true mill circuit slurry pump. It reflects the company's innovation and engineering expertise in hydraulic design, materials science and manufacturing excellence.
Construction, Dewatering and Water Supply (mining), Digester, Flue Gas Desulfurization, Food Processing, Water Treatment, Primary Processing (mining), Scale Recycle, Sewage Collection and Treatment, Slurry Transfer (mining), Leaching Acid
General Industries, Mining, Water Resources, Primary Metals, Pulp and Paper, Power Generation
Dual Casing provides access to elastomeric or hard metal liners for inspection or replacement. Machined mating faces provide proper liner compressions.
Elastomeric and Hard Metal Liners are fully interchangeable, allowing the most economical material to be used.
High-Efficiency, Closed Vane Impeller has adjustable face clearance and generous wear allowance. Threaded shaft to impeller design eliminates troublesome impeller nut.
Removable Stuffing Box converts to various shaft sealing options without modification to the shaft, liner or impeller.
Bearing Cartridge incorporates back-to-back taper roller bearings to carry axial and belt loads. A roller bearing
- Flows to 3600 m3/h (16 000 gpm)
- Heads to 90 m (300 ft)
- Pressures to 40 bar (580 psi)
- Sizes from 50 mm (2 in) to 350 mm (14 in)
Showing all languages below...
TKL™ Titan™ Slurry La Bomba Servicio Pesado, Carcaza Dual Revestida
Flowserve Titan™ Slurry TKL™ Bomba de Polpa com Carcaça Dupla Revestida, para Serviço Pesado
Flowserve вухкорпусной насос с внутренней футеровкой для эксплуатации в тяжелых условиях естник
Flowserve Bombas para minería y para procesamiento de mineral - Beneficio - Hidrometalurgia - Refinado
Flowserve TKL™ Titan™ Slurry Heavy-Duty, Dual Case Lined Pump Sales Bulletin
Flowserve Pumps for Mining and Mineral Processing - Beneficiation, Hydrometallurgy and Refining
Flowserve Pumps for Pipeline Transportation - Crude Oil and Refined Products - Water - Slurry
|Description:||A direct drive, short-shaft version of the Terra-Titan, the Drain-Titan features interchangeable wet-end components. It is particularly useful for seepage water sumps alongside underground roadways.|
|Description:||The Flowserve TKL™ Terra-Titan vertical, cantilever sump pump is ruggedly built to provide the economical reliability demanded by the mining, process and general industries.|
|Description:||The type R rubber lined slurry pump is a horizontal, single stage, end suction design with a tangential discharge nozzle. Engineered to handle high concentrations of fine abrasive solids in suspension or corrosive and abrasive mixtures, the type R is a workhorse in the mining and metal processing industries.|
|Description:||The type RJC rubber lined slurry pump is a true stiff-shaft cantilever design, without bottom bearings and requiring no flushing water. The RJC is particularly well suited for applications for which flushing liquids are not available or cannot be tolerated.|
|Description:||The FRBH is one of the world’s most efficient and reliable pumps Able to perform effectively across a broad operating range, the high efficiency of the FRBH translates into low total cost of ownership.|
|Description:||The type MJC hard metal slurry pump is a true stiff-shaft cantilever design, without bottom bearings and requiring no flushing water. The MJC is particularly well suited for applications in which flushing liquids are not available or cannot be tolerated.|
|Description:||The LC chemical slurry pump is a horizontal, frame mounted, single stage, end suction design with a tangential discharge nozzle. It is engineered to withstand the rigor of applications that are both abrasive and corrosive.|
|Description:||The type RJ rubber lined, vertical lineshaft pump is designed to handle services containing fine solids in suspension and is suitable for a broad range of wet and dry pit applications.|
|Description:||The type MJ hard metal, vertical lineshaft pump is designed to handle services containing coarse solids in suspension and is suitable for a broad range of wet and dry pit applications.|
|Description:||The Flowserve type M hard metal slurry pump is a horizontal, single stage, end suction design with a tangential discharge nozzle. Fitted with a hard metal liquid end, the M pump is engineered to handle high concentrations of coarse, abrasive solids in suspension.|
Ready to buy?
1. Find your closest Flowserve sales contact by using our global sales contacts locator.
2. Call or email the Flowserve sales contact and provide your required specifications.
Still gathering information?
To learn more about Flowserve products, subscribe to our e-mail newsletter.