MF Overhung Solids Handling Pump

The Flowserve MF is an end-suction, side discharge, mixed flow, non-clog pump. This pump is designed specifically for reliability, low cost and long life in demanding sewage handling services or where suspended solids are of particular concern.

Click to enlarge
1 image available

  • Brands:
    Worthington
  • Applications:
    Water Treatment, Digester, Flue Gas Desulfurization, Waste Processing, Sewage Collection and Treatment, Shipping, Ground Water Development and Irrigation
  • Industries:
    Chemical Processing, General Industries, Water Resources, Pulp and Paper, Power Generation

Flexible Design includes horizontal and vertical models, variety of nozzle position options and direct or independent motor mounting.

Minimal Shaft Deflection with oversized shaft and reduced overhang eliminates shaft failure and increases packing or seal life.

Hardened Chrome Steel wear rings and shaft sleeve extend pump life.

Stuffing Box readily accommodates packing or mechanical seals, per customer preference.

Features:

  • Shaft sleeve options
    • 316 stainless steel
    • Hardened chrome steel
  • Bearing housing features
    • Ball or tapered roller bearings
    • Integral jacking bolts for wear ring adjustment
    • Accessible lubrication points
  • Chrome steel wear rings optional
  • Configurations
    • MF (horizontal end-suction)
    • MFV (vertical with motor on separate floor)
    • MFC (vertical with direct connected motor)

Operating Parameters

  • Flows to 2275 m3/h (10 000 gpm)
  • Heads to 90 m (300 ft)
  • Sizes to 400 mm (16 in)

MF Overhung, Solids Handling Pump Chart

MF Overhung, Solids Handling Pump App

Show/hide all languages

Showing all languages below...

Le pompage de l’eau Pompes

Flowserve Le pompage de l’eau Captage et adduction d’eau, Traitement et transport de l’eau, Eaux usées, Irrigation, Maîtrise des crues et drainage

Recursos hidráulicos Bombas

Select format:
8.5 x 11
A4

Flowserve Recursos hidráulicos: Captación y conducción de agua; Tratamiento y distribución; Aguas residuales; Riego; Control de inundaciones, diques secos y drenaje

Водные ресурсы Насосы

Flowserve Водные ресурсы - Источники воды и ее перекачка - Обработка и распределение воды - Сточные воды - Ирригация - Контроль паводковых вод, осушение доков и осушение почв

Risorse Idriche Pompe

Flowserve Risorse Idriche: Presa e Movimentazione delle Acque; Trattamento e Trasferimento; Acque di Rifiuto; Irrigazione; Controllo Inondazioni, Bacini di Carenaggio e Drenaggio

Wasserversorgung Pumps

Flowserve Wasserversorgung Wassergewinnung und Wasserversorgung, Aufbereitungs- und Verteileranlagen, Abwasser, Bewässerungsanlagen, Hochwasserschutz, Trockendocks, Entwässerung

الموارد المائية مضخات

Flowserve الموارد المائية مضخات

水资源市场公告 泵

Flowserve 水资源:用于水资源和水输送;处理和分配;废水;灌溉;抗洪;干码头和排水的泵

Snabdijevanje vodom Pumpe

Flowserve Snabdijevanje vodom - Izvori i prijenos vode Prerada i distribucija - otpadne vode - navodnjavanje Kontrola poplava, suhi dokovi i odvodnja

MF Horizontal close-coupled Centrifugal Pumps User Instructions

Flowserve MF Horizontal, Close Coupled Centrifugal Pumps - User Instructions: Installation, Operation, Maintenance

Pull-Out Assemblies for End-Suction Municipal Water and Waste Water Pumps Bulletin

Pull-Out Assemblies for End Suction Municipal Water and Waste Water Pumps (MN, MF, MC, MS)

Pulp and Paper Pumps

Select format:
8.5 x 11
A4

Flowserve Pumps for Pulp and Paper - Pulp Production, Chemical Recovery, Paper Stock Preparation, Paper Manufacturing, Mill and Environmental Services

MF and MN Pumps Poster

Flowserve MF and MN Pumps - MF Solids-Handling Pumps and MN Large Capacity, Solids-Handling Pumps

Water Resources Pumps

Select format:
8.5 x 11
A4

Flowserve Pumps for Water Resources - Source Water and Water Transmission; Treatment and Distribution - Waste Water - Irrigation; Flood Control, Dry Docks and Drainage

MF Solids-Handling Pumps Bulletin

Select format:
8.5 x 11
A4

Flowserve MF Solids-Handling Pumps

MPT Self-Priming, Overhung, Solids Handling Pump

Description: The Flowserve MPT is a self-priming, solids handling pump designed to provide reliable, peak performance and low cost in demanding services containing suspended solids. The MPT deftly handles dirty, gritty water as well as free-flowing slurries, sewage, sewage sludge and many trade effluents.

MSX Overhung, Solids Handling, Submersible Pump

Description: The Flowserve MSX family of solids handling, submersible pumps is engineered to perform efficiently in the most challenging environments, from pumping raw sewage to moving industrial wastewater and solids-laden liquids.

MN Large Capacity, Solids Handling Pump

Description: The Flowserve MN is an end-suction, side discharge, mixed flow, non-clog pump. This large capacity pump is designed specifically for reliability, low cost and long life in demanding sewage handling services or where suspended solids are of particular concern.

Ready to buy?

1. Find your closest Flowserve sales contact by using our global sales contacts locator.

2. Call or email the Flowserve sales contact and provide your required specifications.

Still gathering information?

To learn more about Flowserve products, subscribe to our e-mail newsletter.

  
Ask a Question

Required Fields












Please choose which of the following best describes you: