Mark 3 Unitized Self-Primer
The Durco Mark 3 Unitized Self-Priming pump is engineered to draw from liquid sources below ground level or from sources that have no positive pressure to naturally prime the pump.
Click to enlarge
1 image available
- Brands:
Durco - Applications:
Polymers, Slurry Processing, Acid Transfer, Caustic and Chlor-alkali, Water Treatment, Gas Treating and Sulfur Recovery, Volatile Organic Compounds, Agriculture, HVAC, Waste Processing, Automotive, Heavy Oil, Oil Sands and Shale, Water Supply and Distribution (water), Auxiliary (chemical), Hydraulic Press (metals), Water Supply and Treatment (oil and gas), Auxiliary Services (power), LNG, Bleach Chemical (pulp and paper), Leaching Acid, Chemical and Liquor (pulp and paper), Coatings (pulp and paper), Nuclear Service, Construction, OEM, Cooling Water (metals), Offsites and Waste Treatment, Desalination, Pharmaceuticals, Dewatering and Water Supply (mining), Plating, Galvanizing and Other Coatings, Drilling and Production, Renewable Fuel Production, Electronics, Sewage Collection and Treatment, FPSO, Shipping, Food Processing, Solvents - Industries:
Chemical Processing, General Industries, Mining, Water Resources, Power Generation, Primary Metals, Pulp and Paper, Oil and Gas - Standards:
ASME (ANSI) - Misc:
External Micrometer Impeller Adjustment accurately sets impeller clearance in 20 seconds, in the shop or the field.
Standard Reverse Vane Impeller offers repeatable pump performance throughout the life of the pump.
Unitized Casing has large priming chamber, air separator and volute in one integral component.
Large Shaft and Bearing Components extend bearing life and reduce shaft deflection and vibration.
Features:
- Offered in a wide range of metallurgy
- Reverse Vane Impeller
- Low, predictable seal chamber pressures
- Low required NPSH
- Rear cover wear surface
- In-shop impeller adjustment
- Repeatable performance assurance
- ANSI 3A Power End
- Certified clean rooom assembly
- Inpro/Seal's VBX isolators
- Magnetic drain plug
- Synthetic oil bath, oil mist, shielded, grease-lube
Operating Parameters
- Flows to 320 m3/h (1400 gpm)
- Heads to 120 m (400 ft)
- Pressures to 20 bar (285 psi)
- Temperatures to 370°C (700°F)
- Static suction lift to 6 m (20 ft)
Mark 3 Unitized Self-Primer App
Mark 3 Unitized Self-Primer Chart
Showing all languages below...
Bombas de Boletín Durco Mark 3
Flowserve Durco Mark 3 Bombas - Mark 3 estándar, Sealmatic, Lo-Flo, Impulsor empotrado, Auto cebador unificado
Durco Mark 3 Pumps Bulletin
Durco Mark 3 Product Bulletin-ANSI Chemical Process Pump including the: Mark 3 Standard, Sealmatic, Lo-Flo, Recessed Impeller, Unitized Self Primer
Durco Mark 3 Pompes
Durco Mark 3 Pompes process-chimie ANSI Mark 3 Standard, Sealmatic, Lo-Flo, Vortex Auto-amorçante
Boletín de ejes de acero inoxidable sólido y otros ejes para bombas de proceso Durco
Flowserve Solid Stainless Steel and Other Shafts for Durco Process Pumps - (Ejes sólidos de acero inoxidable y de ostros tipos para las bombas de proceso Durco)
Flowserve Solid Stainless Steel and Other Shafts
Flowserve Solid Stainless Steel and Other Shafts for Durco Process Pumps - (Alberi monoblocco in acciaio inossidabile e altri Tipi per le pompe di processo Durco)
Flowserve Solid Stainless Steel and Other Shafts for Durco Process Pumps
Flowserve Solid Stainless Steel and Other Shafts for Durco Process Pumps - (Arbres en acier massif et autres arbres pour les Pompes process Durco)
Solid Stainless Steel and Other Shafts for Durco Process Pumps Bulletin
Flowserve Solid Stainless Steel and Other Shafts for Durco Process Pumps
Flowserve Solid Stainless Steel and Other Shafts for Durco Process Pumps
Flowserve Solid Stainless Steel and Other Shafts for Durco Process Pumps - (Ejes sólidos de acero inoxidable y de ostros tipos para las bombas de proceso Durco)
Flowserve Solid Stainless Steel and Other Shafts for Durco Process Pumps
Flowserve Solid Stainless Steel and Other Shafts for Durco Process Pumps - (Vollwellen aus Edelstahl und Verbundwerkstoffen für Durco-Prozesspumpen)
Bombas de geração de energia
Flowserve Geração de Energia: Ciclo Combinado, Combustíveis Fósseis, Nucle
Produzione di energia
Flowserve Produzione di energia: Cicli combinati, Combustibili fossili, Nucleare
Production d' énergie
Flowserve Production d’ énergie: Cycle Combiné, Combustible fossile, Nucléaire
Hydrocarbon Processing Pumps Market Bulletin
Flowserve Hydrocarbon Processing: Refining, Petrochemical Processing
Hydrocarbon Processing Pumps
Flowserve Pumps for Hydrocarbon Processing - Refining, Petrochemical Processing
Kohlenwasserstoffverarbeitung
Flowserve Kohlenwasserstoffverarbeitung - Raffination, Petrochemische Prozesse
Bombas de Processamento de Hidrocarbonetos
Flowserve Bombas de Processamento de Hidrocarbonetos - Refino, Processamento petroquímico
Trasformazione degli idrocarburi
Flowserve Trasformazione degli idrocarburi: Raffinazione, Petrolchimica
Chemical Processing Pumps
Flowserve Pumps for Chemical Processing - Process, Heat transfer, Effluent Treatment, Auxiliary
Chemieprozesse Pumpen
Flowserve Chemieprozesse: Prozess, Wärmetauscher, Abwasseraufbereitung, Hilfssysteme
Chemical Processing Pumps
Flowserve Pumps for Chemical Processing - Process, Heat transfer, Effluent Treatment, Auxiliary
Oil & Gas Market Bulletin
Oil & Gas: Production and Pumpline pumps-offshore, onshore, synthetic crude, and liquid natural gas
Öl & Gas
Flowserve Öl & Gas: Produktion, Pipeline - Offshore, Onshore, Synthetisches Rohöl, Flüssignaturgas
Petróleo e Gás
Flowserve Petróleo e Gás: Produção e Oleodutos - Offshore, Onshore, Petróleo, GLP - Gás Liquefeito de Petróleo
Oil & Gas Market Bulletin
Flowserve Oil and Gas: Production and Pipeline Pumps - Offshore, Onshore, Sythetic Crude, Liquid Natural Gas
Petrolio e Gas
Flowserve Petrolio e gas: Esplorazione e produzione, Oleodotti - Offshore, Onshore, Greggio sintetico, Gas naturale liquefatto
Pulp and Paper Pumps
Flowserve Pumps for Pulp and Paper - Pulp Production, Chemical Recovery, Paper Stock Preparation, Paper Manufacturing, Mill and Environmental Services
Mark 3 Pre-Engineered Baseplates Bulletin
Mark 3 Pre-Engineered Baseplates - Flowserve offers a family of five types of pre-engineered baseplate designs to extend pump life and reduce costs.
Durco® Mark 3™ Pumps Bulletin
Flowserve Durco Mark 3 Pumps - ASME Chemical Process Pumps including the: Mark 3 Standard, Sealmatic, Lo-Flo™, Recessed Impeller and Unitized Self-Primer
Solid Stainless Steel and Other Shafts for Durco Process Pumps Bulletin
Flowserve Solid Stainless Steel and Other Shafts for Durco Process Pumps
Durco Mark 3 ANSI Pumps Maintenance Checklist
Flowserve Durco Mark 3 ANSI Pumps Maintenance Checklist
Power Generation Pumps
Flowserve Pumps for Power Generation - Combined cycle, fossil fuels and nuclear
Hydrocarbon Processing Pumps
Flowserve Pumps for Hydrocarbon Processing - Refining, Petrochemical Processing
Chemical Processing Pumps
Flowserve Pumps for Chemical Processing - Process, Heat Transfer, Effluent Treatment, Auxiliary
Pulp and Paper Pumps
Flowserve Pumps for Pulp and Paper - Pulp Production, Chemical Recovery, Paper Stock Preparation, Paper Manufacturing, Mill and Environmental Services
RTN-R Certificate Newark
RTN-R Newark Pump type: HOC3, GRP, E-LINE, FRBH, CPX, CPXM, CPXG, CPXP, CPXR, CPXRM, CPXS, CPXPM, CPXPS, CPXSM, Mark3, Mark3-in line, Lo-Flo, Sealmatic, Guardian, Polychem S/F/L/M/GRP-Series, ME, MEN, Chemstar, Chemstart MD, CPXN, CPXNS, WMV, LNN, LNNV, LNNC, LRS, LR, LRV, LLR, CPXV, CPXRV, FRBHJ, Polychem VGRP-Series, FRBHJC
Oil & Gas Pumps
Flowserve Pumps for Oil & Gas - Upstream and Pipeline - Offshore, Onshore, Synthetic Crude and LNG
CPXP Self-Priming ISO Chemical Process Pump
| Description: | Operating on the reflux priming principle, the CPXP self-priming pump offers state-of-the-art hydraulics, versatile operation and reliable performance while costing considerably less to buy, install and maintain than submersible pumps. |
|---|
Mark 3 Sealmatic ANSI Standard, Overhung Pump
| Description: | The Flowserve Mark 3 Sealmatic pump uses a dynamically sealing repeller to eliminate the need for mechanical seals in tough to seal services. This pump conforms to ANSI B73.1M standards and is completely interchangeable with the industry leading Mark 3A power end. |
|---|
Mark 3 In-Line Overhung Chemical Process Pump
| Description: | The Durco Mark 3 In-Line pump exceeds ANSI B73.2M design criteria. This space-saving design utilizes the industry-leading Mark 3A power end and other Mark 3 advanced features for maximum Mean Time Between Planned Maintenance (MTBPM). |
|---|
Mark 3 Lo-Flo Overhung Chemical Process Pump
| Description: | The Durco Mark 3 Lo-Flo pump is designed to improve pump reliability and performance in low-flow, high-head applications. Its innovatiive radial vane impeller and circular, concentric casing was developed to reduce radial loads and shaft vibration while extending bearing and mechanical seal life. |
|---|
Mark 3 Recessed Impeller, Overhung Chemical Process Pump
| Description: | The Durco Mark 3 Recessed Impeller pump combines the best design features of the Mark 3 ANSI Standard pump with the vortex action of a recessed impeller. |
|---|
Mark 3 ASME Standard Overhung Chemical Process Pump
| Description: | The Durco Mark 3 pump is recognized as the worldwide leader in ANSI chemical process pumps. This ANSI B73.1M design offers the industry's most advanced design features for maximum Mean Time Between Planned Maintenance (MTBPM). |
|---|
Ready to buy?
1. Find your closest Flowserve sales contact by using our global sales contacts locator.
2. Call or email the Flowserve sales contact and provide your required specifications.
Still gathering information?
To learn more about Flowserve products, subscribe to our e-mail newsletter.
