DVSR Nuclear Radially Split, Volute Casing, Single Stage Pump
Engineered for reactor and steam generator feed applications, this pump meets ASME Section Vlll design standards. It is a proven performer in nuclear rated services.
Cast volute casing configuration.
Double cover design features include centerline supported mounting, radially split casing and double suction impeller.
Sleeve radial and tilting pad thrust bearings are standard.
- Flows to 4535 m3/h (19 945 gpm)
- Heads to 800 m (2625 ft)
- Discharge pressures to 100 bar (1470 psi)
- Temperatures to 210°C (410°F)
- Speeds to 6000 rpm
- Power rating to 8000 kW (10 700 hp)
Showing all languages below...
Flowserve Pumps for Nuclear Power - Pumps, Seals, Engineering and Technical Support, Re-rates and Upgrades and Aftermarket Services
|Description:||This ASME Section lll, Class 2 and 3 pump is designed for chemical and volume control system charge service with boiling water reactors (BWR), pressurized water reactors (PWR), and pressurized heavy-water reactors (PHWR).|
|Description:||The EG is a single stage, double suction, radial split case, heavy duty process pump, specifically designed for component cooling water service for the AREVA nuclear plants. Conforming to ASME Section III, Class 3, it features centerline mounting and suction with discharge flange in the top portion of the pump casing.|
|Description:||The single stage, volute style HDR is a high speed pump ideal for reactor and steam generator feedwater service.|
|Description:||The MEV is a bottom suction, side discharge vertical pump. The pump is equipped with a mechanical seal and grease lubricated bearings. Compliant with ASME Section III, Class 3, it is applied in water services in fossil and nuclear power plants.|
|Description:||The CA pump is designed specifically for nuclear safety injection service. This radially split, between bearing, multistage design complies with ASME Section III< Class 2 and 3.|
CAM Nuclear ASME Section III, Class 2 and 3, Between Bearing, Radially Split, Multistage, Safety Inje
|Description:||The Flowserve CAM high pressure safety injection pump is designed specifically for nuclear charge service. This between bearing, radially split, multistage design complies with ASME Section III, Class 2 and 3.|
|Description:||This ASME Section lll, Class 1 is designed for primary coolant, reactor recirculation and primary heat transport service with boling water reactors (BWR), pressurized water reactors (PWR), and pressurized heavy-water reactors (PHWR).|
|Description:||The CN single-stage, high-speed pump features a rugged, diffuser-style barrel design. Designed to ASME Section IV Division 1 requirements as well as customer specifications, it also features a centerline mounted, radially split casing and a double-suction impeller. This design renders nearly balanced axial hydraulic thrust over the full operating range of the pumps.|
|Description:||The WDF is a vertical, single stage pump specifically designed for safety related shutdown services in nuclear power plants. It features bottom suction and side discharge for a compact piping arrangement.|
Ready to buy?
1. Find your closest Flowserve sales contact by using our global sales contacts locator.
2. Call or email the Flowserve sales contact and provide your required specifications.
Still gathering information?
To learn more about Flowserve products, subscribe to our e-mail newsletter.