APKD Vertical, Double Case, Double Suction Pump
The double case APKD features an innovative, double suction impeller in a true twin-volute design that produces more flow and higher head at lower NPSHR and can operate at higher speeds than conventional vertical turbine pump models.
Nuclear Service, Crude, Product and CO2 Pipeline, Cooling Water (power), Condensate Extraction
Oil and Gas, Power Generation
Broad Hydraulic Versatility through a series of impeller design options enables better hydraulic fit for each application. The result is lower energy consumption and operating costs.
Double Suction First Stage Impeller reduces NPSHR and meets Hydraulic Institute standards for suction-specific speed. This design means a shorter, more rigid pump, providing freedom from cavitation over a wide operating range.
Double Volute Design minimizes radial loads, extending bearing life.
Suction Can creates optimal hydraulic conditions through the suction flange inlet into the suction bell.
Rigid, Adjustable Flanged Coupling maintains accurate pump-motor alignment, provides proper impeller clearance adjustment and facilitates seal maintenance.
- Flows to 4600 m3/h (20 200 gpm)
- Heads to 500 m (1640 ft)
- Pressures to 50 bar (725 psi)
- Temperatures from -45°C (-50°F) to 95°C (200°F)
- Speeds to 1800 rpm
Showing all languages below...
Flowserve Bombas de energía solar concentrada - Colector parabólico - Torre de concentración
Атомная энергетика - Насосы - Уплотнения - Разработка и техническая поддержка Изменение рабочих параметров и модернизация - Послепродажное обслуживание
Flowserve APKD Pumps - Double-Case, Double-Suction Vertical Pump
Flowserve APKD Pumps - Vertical Double-Suction, Double-Casing Pump
RTN-R Coslada Pump type: CS, CBC, WXH, NM, WX, WDX, CSB, CHTA, WCC, WNC, WXB, CA, CB, VTP, APM, APMA, APS, APH, APHH, APHJ, APKD, APKC, QLQC
Flowserve Pumps for Concentrated Solar Power - Parabolic Trough - Power Tower
Flowserve Pumps for Nuclear Power - Pumps - Seals - Engineering and Technical Support - Re-rates and Upgrades - Aftermarket Services
Flowserve Geothermal Power Generation Pumps - Production Well - Heat Transfer Fluid - Condensate Extraction - Circulating Water - Re-injection Well
|Description:||The VPC vertical turbine, double casing pump is a diffuser type, single or multistage design for services with limited NPSH available.|
|Description:||The Flowserve QL vertical, double suction pump has a single impeller and true twin volute design that produces more head and can operate at higher speeds than conventional, multistaged vertical turbine models. It can be used in all wet pit applications and virtually eliminates erosion and corrosion of the shaft, bearings and all internal components.|
|Description:||The QLC and QLQC are double casing, double suction, vertical turbine pumps. Available in single or multistage units and featuring true twin volutes, these pumps incorporate the proven hydraulics of the QL and QLQ into a double casing configuration.|
|Description:||The VTP vertical turbine pump is a diffuser type, single or multistage design for continuous service in wet pit and deep well applications. With more than 300 bowl and impeller designs, the VTP provides unsurpassed hydraulic coverage to ensure the best pump selection for a wide variety of services.|
Ready to buy?
1. Find your closest Flowserve sales contact by using our global sales contacts locator.
2. Call or email the Flowserve sales contact and provide your required specifications.
Still gathering information?
To learn more about Flowserve products, subscribe to our e-mail newsletter.