PolyChem S-Series Fluoropolymer Lined Overhung ISO Chemical Process Pump
The Flowserve PolyChem S-Series ISO pumps are non-metallic, conventionally sealed pumps designed to meet ISO 2858 dimensional standards. The S-Series is designed with PFA-lined wet ends for superior corrosion resistance and temperature allowance.
Click to enlarge
1 image available
- Brands:
Durco - Applications:
Water Treatment, Plating, Galvanizing and Other Coatings, Renewable Fuel Production, Shipping, Polymers, Solvents, Volatile Organic Compounds, Agriculture, Waste Processing, Automotive, Auxiliary (chemical), Caustic and Chlor-alkali, Construction, Desalination, Electronics, Food Processing, OEM, Pharmaceuticals, Acid Transfer - Industries:
Chemical Processing, Water Resources, Primary Metals, General Industries - Standards:
ASME (ANSI), ISO - Misc:
PFA Lined Wet End is globally preferred for its superior corrosion resistance and temperature allowance.
Rugged Metal Armor meets material specifications of GGG40.3.
Separate Inner Magnet and Impeller Components significantly reduces impeller replacement cost compared to integral inner magnet / impeller designs.
Rotating Shaft Design eliminates need for shaft support obstructions in the casing inlet.
Rugged Silicon Carbide Bearings offer the ultimate material for wear resistance and chemical inertness.
Operating Parameters
- Flows to 420 m3/h (1850 gpm)
- Heads to 145 m (480 ft)
- Pressures to 17 bar (250 psi)
- Temperatures from -30°C (-20°F) to 150°C (300°F)
PolyChem S-Series Fluoropolymer Lined Overhung ISO Chemical Process Pump Chart
PolyChem S-Series ISO Overhung, Non-Metallic Pump App
Showing all languages below...
Chemical Processing Pumps
Flowserve Pumps for Chemical Processing - Process, Heat transfer, Effluent Treatment, Auxiliary
Chemieprozesse Pumpen
Flowserve Chemieprozesse: Prozess, Wärmetauscher, Abwasseraufbereitung, Hilfssysteme
Chemical Processing Pumps
Flowserve Pumps for Chemical Processing - Process, Heat transfer, Effluent Treatment, Auxiliary
Pulp and Paper Pumps
Flowserve Pumps for Pulp and Paper - Pulp Production, Chemical Recovery, Paper Stock Preparation, Paper Manufacturing, Mill and Environmental Services
Pulp and Paper Pumps
Flowserve Pumps for Pulp and Paper - Pulp Production, Chemical Recovery, Paper Stock Preparation, Paper Manufacturing, Mill and Environmental Services
Chemical Processing Pumps
Flowserve Pumps for Chemical Processing - Process, Heat Transfer, Effluent Treatment, Auxiliary
PolyChem S-Series Pumps User Instructions
Installation, Operation, & Maintenance instructions for PolyChem S-Series Pumps - ISO and ANSI (Incorporating P-30-502-E)
RTN-R Certificate Newark
RTN-R Newark Pump type: HOC3, GRP, E-LINE, FRBH, CPX, CPXM, CPXG, CPXP, CPXR, CPXRM, CPXS, CPXPM, CPXPS, CPXSM, Mark3, Mark3-in line, Lo-Flo, Sealmatic, Guardian, Polychem S/F/L/M/GRP-Series, ME, MEN, Chemstar, Chemstart MD, CPXN, CPXNS, WMV, LNN, LNNV, LNNC, LRS, LR, LRV, LLR, CPXV, CPXRV, FRBHJ, Polychem VGRP-Series, FRBHJC
Pulp and Paper Pumps
Flowserve Pumps for Pulp and Paper - Pulp Production, Chemical Recovery, Paper Stock Preparation, Paper Manufacturing, Mill and Environmental Services
PolyChem M-Series Fluoropolymer Lined, Magnetic Drive, Overhung ISO Chemical Process Pump
| Description: | The Flowserve PolyChem M-Series ISO pumps are non-metallic, magnetic drive pumps designed to meet ISO 2858 dimensional standards. The M-Series is designed with PFA-lined wet ends for superior corrosion resistance and temperature allowance. |
|---|
PolyChem M-Series Fluoropolymer Lined, Magnetic Drive, Overhung ASME Chemical Process Pump
| Description: | The Flowserve PolyChem M-Series ASME pumps are non-metallic magnetic drive pumps designed to meet ASME B73.1 dimensional standards. The M-Series is designed with PFA-lined wet ends for superior corrosion resistance and high temperature performance. |
|---|
PolyChem S-Series Fluoropolymer Lined Overhung ASME Chemical Process Pump
| Description: | The Flowserve PolyChem S-Series ASME pumps are non-metallic, conventionally sealed pumps designed to meet ASME B73.1 dimensional standards. The S-Series is designed with PFA-lined wet ends for superior corrosion resistance and temperature allowance. |
|---|
PolyChem GRP Engineered Polymer Composite Overhung Chemical Process Pump
| Description: | The PolyChem GRP pump is a single stage, end suction, centrifugal pump designed to ANSI/ASME B73.5 M Standards. With corrosion resistance superior to more expensive and highly-alloyed metals and costs closer to that of ductile iron, the PolyChem GRP pump has proven to be the low-cost, long-term solution in acidic and chloride-rich applications. |
|---|
Mark 3 ASME Standard Overhung Chemical Process Pump
| Description: | The Durco Mark 3 pump is recognized as the worldwide leader in ANSI chemical process pumps. This ANSI B73.1M design offers the industry's most advanced design features for maximum Mean Time Between Planned Maintenance (MTBPM). |
|---|
Ready to buy?
1. Find your closest Flowserve sales contact by using our global sales contacts locator.
2. Call or email the Flowserve sales contact and provide your required specifications.
Still gathering information?
To learn more about Flowserve products, subscribe to our e-mail newsletter.
