Durco Mark 3 ISO Overhung, Chemical Process Pump
Conforming to ISO 2858 and ISO 5199 design criteria and incorporating advanced design features, the Durco Mark 3 ISO chemical process pump provides unmatched performance and reliability. This ruggedly designed pump offers significant operational and maintenance-enhancing benefits to minimize the total cost of pump ownership.
Click to enlarge
1 image available
- Brands:
Durco - Applications:
Coatings (pulp and paper), Nuclear Service, Construction, Offsites and Waste Treatment, Cooling Water (metals), Pharmaceuticals, Desalination, Plating, Galvanizing and Other Coatings, Dewatering and Water Supply (mining), Polymers, Drilling and Production, Renewable Fuel Production, Electronics, Sewage Collection and Treatment, FPSO, Shipping, Acid Transfer, Food Processing, Slurry Processing, Agriculture, Gas Treating and Sulfur Recovery, Solvents, Automotive, HVAC, Volatile Organic Compounds, Auxiliary (chemical), Heavy Oil, Oil Sands and Shale, Hydraulic Press (metals), Waste Processing, Auxiliary Services (power), LNG, Water Supply and Distribution (water), Bleach Chemical (pulp and paper), Leaching Acid, Water Supply and Treatment (oil and gas), Caustic and Chlor-alkali, Water Treatment, Chemical and Liquor (pulp and paper), OEM - Industries:
Chemical Processing, General Industries, Mining, Water Resources, Power Generation, Primary Metals, Pulp and Paper, Oil and Gas - Standards:
ISO - Misc:
Heavy-duty Casing with integral foot and multi-ribbed discharge flange provides superior resistance to pipe loads and improves reliability.
Reverse Vane Impeller is the only impeller design that offers repeatable pump performance throughout the life of the pump. Open impellers are available.
SealSentry™ Seal Chamber extends seal life and provides advanced self-flushing capability.
Two-piece, Ductile Iron Bearing Housing is designed for safety, strength, interchangeability and retrofit capability.
External Micrometer Impeller Adjustment Mechanism accurately sets impeller clearance in 20 seconds, in the shop or the field.
IPS Beacon power end condition monitor provides a visual signal that a current or past alert condition has occurred.
Back Pull-out Design allows removal of rotating element without removing casing, piping or motor.
Operating Parameters
- Flows to 1400 m3/h (6160 gpm)
- Heads to 220 m (720 ft)
- Pressures to 25 bar (365 psi)
- Temperatures from -80°C (-110°F) to 400°C (752°F)
Durco Mark 3 ISO Overhung, Chemical Process Pump Chart
Showing all languages below...
Durco® Mark 3™ ISO Насос для химических процессов
Flowserve Durco® Mark 3™ ISO Насос для химических процессов - ISO 2858/5199
Mark 3™ ISO značky Durco® Chemické procesní čerpadlo
Mark 3™ ISO značky Durco® Chemické procesní čerpadlo - ISO 2858/5199
Pompe process chimie Durco® Mark 3™ ISO
Flowserve Pompe process chimie Durco® Mark 3™ ISO - ISO 2858/5199
Durco® Mark 3™ ISO Chemieprozesspumpe
Flowserve Durco® Mark 3™ ISO Chemieprozesspumpe - ISO 2858/5199
Bomba de Proceso Químico ISO Durco® Mark 3™
Flowserve Bomba de Proceso Químico ISO Durco® Mark 3™ - ISO 2858/5199
Bomba de Processo Químico Durco® Mark 3™ ISO
Flowserve Bomba de Processo Químico Durco® Mark 3™ ISO - ISO 2858/5199
Bomba de proceso Durco® Mark 3™ ISO
Flowserve Bomba de proceso Durco® Mark 3™ ISO para la Industria Química - ISO 2858/5199
Chemical Processing Pumps
Flowserve Pumps for Chemical Processing - Process, Heat transfer, Effluent Treatment, Auxiliary
Chemical Processing Pumps
Flowserve Pumps for Chemical Processing - Process, Heat transfer, Effluent Treatment, Auxiliary
Processamento de Produtos Químicos
Processamento de Produtos Químicos - Processamento - Transferência de Calor-Tratamento de Efluentes - Auxiliares
Chemieprozesse Pumpen
Flowserve Chemieprozesse: Prozess, Wärmetauscher, Abwasseraufbereitung, Hilfssysteme
Bombas para minería y para procesamiento de mineral
Flowserve Bombas para minería y para procesamiento de mineral - Beneficio - Hidrometalurgia - Refinado
Energía solar concentrada
Flowserve Energía solar concentrada - Colector parabólico - Torre de concentración
Marca Registrada Durco 3 ISO Lista de Verificacion de Mantenimiento
Flowserve Marca Registrada Durco 3 ISO - ISO 2858/5199
Durco® Mark 3™ ISO Mantenimiento - Listado de puntos a verificar
Flowserve Durco® Mark 3™ ISO - ISO 2858/5199
Desalination Products Market Bulletin
Flowserve Products for Desalination - Reverse Osmosis, Multi-Stage Flash, Multi-Effect Distillation
Equipos para sistemas de desalinización mediante ósmosis inversa
Equipos para sistemas de desalinización mediante ósmosis inversa - Bombas - Dispositivos de recuperación de energía - Válvulas - Sellos mecánicos
Équipement pour systèmes de désalinisation par osmose inverse
Flowserve Équipement pour systèmes de désalinisation par osmose inverse - Pompes - Dispositifs de récupération d’énergie - Vannes - Garnitures d’étanchéité
Produzione di energia
Flowserve Produzione di energia: Cicli combinati, Combustibili fossili, Nucleare
Production d' énergie
Flowserve Production d’ énergie: Cycle Combiné, Combustible fossile, Nucléaire
Bombas de geração de energia
Flowserve Geração de Energia: Ciclo Combinado, Combustíveis Fósseis, Nucle
Durco® Mark 3™ ISO Pumps Bulletin
Flowserve Durco® Mark 3™ ISO Pumps - Chemical Process Pump - ISO 2858/5199
Durco Mark 3 ISO Frame Mounted Pumps User Instructions
Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps
Chemical Processing Pumps
Flowserve Pumps for Chemical Processing - Process, Heat Transfer, Effluent Treatment, Auxiliary
Pulp and Paper Pumps
Flowserve Pumps for Pulp and Paper - Pulp Production, Chemical Recovery, Paper Stock Preparation, Paper Manufacturing, Mill and Environmental Services
Mining and Mineral Processing Pumps Bulletin
Flowserve Pumps for Mining and Mineral Processing - Beneficiation, Hydrometallurgy and Refining
Concentrated Solar Power Pumps
Flowserve Pumps for Concentrated Solar Power - Parabolic Trough, Power Tower
Durco® Mark 3™ ISO Bomba de proceso químico
Flowserve Durco® Mark 3™ ISO Bomba de proceso químico - ISO 2858/ISO 5199
Desalination Pumps
Flowserve Pumps for Desalination - Reverse Osmosis, Multistage Flash, Multi-Effect Distillation
Equipment for Reverse Osmosis Desalination Systems
Flowserve Equipment for Reverse Osmosis Desalination Systems - Pumps - Energy Recovery Devices - Valves - Seals
Genuine Flowserve Replacement Parts Bullletin
Genuine Flowserve Replacement Parts Bulletin - Chemical Process Pumps
Durco Mark 3 ISO Frame Mounted Pumps User Instructions
Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps
Durco Mark 3 ISO Frame Mounted Pumps User Instructions C
Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps
Durco Mark 3 ISO Frame Mounted Pumps User Instructions
Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps
Durco Mark 3 ISO Frame Mounted Pumps User Instructions
Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps
Durco Mark 3 ISO Frame Mounted Pumps User Instructions
Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps
Durco Mark 3 ISO Frame Mounted Pumps User Instructions
Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps
Durco Mark 3 ISO Frame Mounted Pumps User Instructions
Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps
Durco Mark 3 ISO Frame Mounted Pumps User Instructions
Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps
Durco Mark 3 ISO Frame Mounted Pumps User Instructions
Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps
Durco Mark 3 ISO Frame Mounted Pumps User Instructions C
Installation, Operation, and Maintenance Instructions for Mark 3 ISO standard foot mounted, centreline mounted and unitized self-priming chemical process pumps
Power Generation Pumps
Flowserve Pumps for Power Generation - Combined cycle, fossil fuels and nuclear
Durco Mark 3 ISO Recessed Impeller, Overhung, Chemical Process Pump
| Description: | The Durco Mark 3 ISO Recessed Impeller pump provides low-shear pumping of friable solids and trouble-free pumping of stringy or fibrous slurries. Solids are drawn into the vortex of swirling liquid and discharged by centrifugal force, with only a fraction of the media contacting the impeller. |
|---|
Durco Mark 3 ISO Self Priming, Overhung, Chemical Process Pump
| Description: | Costing less to buy, install and maintain than submersible pumps, the Durco Mark 3 ISO Self Priming pump is designed to draw liquid from sources below ground level or from sources with no positive pressure to naturally prime the pump. Its compact design enables it to fit in tight clearance locations and to be trailer mounted. |
|---|
Mark 3 ASME Standard Overhung Chemical Process Pump
| Description: | The Durco Mark 3 pump is recognized as the worldwide leader in ANSI chemical process pumps. This ANSI B73.1M design offers the industry's most advanced design features for maximum Mean Time Between Planned Maintenance (MTBPM). |
|---|
CPXV ISO and API Chemical Sump Pump
| Description: | Compliant with ISO 5199, the CPXV is a vertical sump pump incorporating state-of-the-art hydraulic design for efficient and reliable service. It is highly customizable to meet a wide range of needs. And, for oil and gas installations, the CPXV is available with many ISO 13709/API 610 compliant features. |
|---|
CPXS Magnetic Drive, Overhung, Chemical Process Pump
| Description: | The CPXS Magnetic Drive pump provides leak-free pumping of hazardous, toxic, flammable, explosive or valuable liquids. Conforming to ISO 2858 dimensional and ISO 15783 design criteria, the CPXS Magnetic Drive pump is found wherever reliability in severe services is a requirement. |
|---|
Durco Mark 3 ISO Close Coupled, Overhung, Chemical Process Pump
| Description: | With pump ends conforming to ISO 2858 and ISO 5199 design criteria, the Durco Mark 3 ISO Close Coupled pump provides a compact, space-saving arrangement ideal for industrial processes or installations where space is at a premium. |
|---|
Ready to buy?
1. Find your closest Flowserve sales contact by using our global sales contacts locator.
2. Call or email the Flowserve sales contact and provide your required specifications.
Still gathering information?
To learn more about Flowserve products, subscribe to our e-mail newsletter.
