WTB Between Bearings, Two- and Three-Stage, Radially Split Process Pump
The WTB pump is a between bearings, radially split, volute type process pump engineered to provide safe, reliable operation at elevated temperatures and pressures. The two-stage WTB is fully compliant with ISO 13709/API 610 (BB2). The three-stage WTB meets all the key ISO13709/API 610 (BB2) requirements
Acid Transfer, Hydrotreating, Boiler Feed, LNG, Catalytic Cracking, Caustic and Chlor-alkali, Offsites and Waste Treatment, Residuum and Heavy Oil Upgrading, Distillation (oil and gas), Solvents, Volatile Organic Compounds, FPSO, Water and CO2 Injection, Gas to Liquids, Geothermal Well Services, HVAC, Heat Transfer Fluids, Heavy Oil, Oil Sands and Shale, Hydrocracking, Industrial Gases
Chemical Processing, Power Generation, Oil and Gas, General Industries
Heavy-Duty, Dual Volute Casing With an Integral Crossover ensures radial hydraulic balance and stable performance over the pump’s full operating range. Shaft deflection and vibration are virtually eliminated.
Centerline Supported, Radially Split Design prevents distortion at high temperatures and pressures. Fully confined gasket fits provide superior sealing versus horizontally split case pumps.
Dynamically Balanced Impellers ensure hydraulic efficiency and are positively locked to the shaft to eliminate vibration.
Double-Suction First-stage Impeller minimizes axial thrust and significantly reduces NPSHR, often eliminating the need for booster units.
Rotor Hydraulic Balance is achieved by using an inherently hydraulically balanced double-suction impeller in tandem with second- and third-stage impellers with balance holes.
ISO 21049/API 682 Seal Chamber accommodates a wide variety of seal configurations.
- Flows to 1400 m3/h (6165 gpm)
- Heads to 1100 m (3610 ft)
- Pressures to 108 bar (1565 psi)
- Temperatures to 430°C (800°F)
- Speeds to 3600 rpm
Showing all languages below...
Flowserve WTB Pumps - Between Bearings, Two- and Three-Stage, Radially Split Process Pump - ISO 13709/API 610 (BB2)
RTN-R Arnage Pump type: CPX, CNX, LC, LCB, ME, MHP, DS, MEN, MENBLOC, GWP, SVCN, SVC, HNN, LC-V, FV, LNN, LNE, LN, LNS, SL, LNGT, MP, HE, HED, HXB, HVC, RHC, UYD, JTC, UYS, F, NM, NMD, NMDA, WDX, NMAD, AS, WTB, AC, NMS, VF, HHS, HS, L, M, EK, SP, CSO, LCS, ECPJ, QL, AH, ERPJ, MEN-SP, CPXV, PL-C, LCP, WY, WB
RTN permission for Niigata pump types HNN, HPX, CNEC, LH, LN, L, M, H, HH, VTH, QEAC, HE, HED, HDS, WTB, HDX, HDXN, DMX, DA, DAD, WLH, WT, WXH, BP, CNEJD, CNFEJD, V330, V380, V3150, VTEL, VTEM, VTE, VQE, VSE, VTN, VQN, VSN
HED-DS ISO 13709/API 610 (BB2) Between Bearings, Single Case, Radially Split, Double Suction Two Stage Pump
|Description:||The Flowserve HED-DS is a radially split, two stage pump designed to the latest ISO 13709/API 610 (BB2) standards, with a double suction first stage impeller.|
HED ISO 13709/API 610 (BB2) Between Bearings, Single Case, Radially Split, Double Suction, Two Stage Pump
|Description:||The Flowserve HED is a radially split, two stage pump designed to ISO 13709/API 610 (BB2), latest edition. The HED fills the performance gap between the single stage HDX and the double casing multistage lines for high temperature services.|
HDX ISO 13709/API 610 (BB2) Between Bearings, Single Case, Radially Split, Single Stage Double Suction Pump
|Description:||The HDX pump bridges the flow and pressure disparity between overhung and multistage process pump lines. Fully compliant with the latest ISO 13709/API 610 (BB2) standards, the HDX is engineered for safe, reliable performance at the elevated temperatures and pressures of refining and power applications.|
Ready to buy?
1. Find your closest Flowserve sales contact by using our global sales contacts locator.
2. Call or email the Flowserve sales contact and provide your required specifications.
Still gathering information?
To learn more about Flowserve products, subscribe to our e-mail newsletter.